How to descale the condenser of laser chiller?

According to the type of laser chiller, the descaling of the condenser is divided into air cooling and water cooling.
For the cleaning of the condenser of the air-cooled chiller, the dust on the surface can be removed mainly with a flexible shaft brush, and the dirt can also be removed with a descaling agent, which is simple and fast to operate.

For water-cooled condenser, the cleaning work is mainly to remove scale, scale is relatively difficult to clean and clean must use scale remover and cleaning pump and liquid distribution tank and other equipment. It has two methods: physical cleaning method and chemical cleaning method. Physical cleaning method is that the flexible shaft brush relies on the high-speed rotation of the motor of the cleaning machine to remove the scale, and finally rinsing with water. The operation is relatively laborious, and the cleaning effect of hard scale and corrosion products with strong adhesion is not good. Chemical cleaning method is to use a certain proportion of cleaning liquid for cleaning, first cleaning with acid solution, and then neutralizing and cleaning with alkali solution, the cleaning liquid is continuously circulated, and finally rinsing with water to rinse the acid and alkali solution. Although this method is thoroughly descaled, it may cause corrosion to the condenser copper pipe. Pay more attention in the process of descaling to avoid causing greater damage to the chiller.

Tips: The descaling of laser chiller is an important work, we should pay more attention in the descaling process to avoid causing greater damage to the chiller; Descaling is also an important aspect of the daily maintenance of laser chiller, which should be carried out regularly and regularly. In the long-term use of the chiller, regular maintenance and maintenance will improve the efficiency of your machine and extend the service life of the equipment.

Source: Coolingstyle