How to choose chiller for printing equipment

When the printing equipment is working, the temperature of the plate, ink and paper will affect the printing quality and the service life of the press. For example, the printing plate temperature is too high, which will cause the paper to be deformed by heat, resulting in a decline in printing quality; The temperature of the ink will affect the uniformity and quality of the printing. Friction between components also generates heat, reducing the quality of the ink and the efficiency of the printing operation.

Therefore, we need to configure a chiller for it to reduce the temperature of each component of the printing press by circulating low-temperature cold water, so as to stabilize the temperature of printing processing and ensure the printing quality and service life of the printing press.

It is very important to choose a matching chiller for the printing equipment. The value of printing equipment is expensive, and the poor selection is easy to cause frequent alarm of the equipment, resulting in frequent failures and damage to the printing equipment.

Therefore, in the selection of chiller, first of all to determine the printing equipment needs refrigeration cycle water flow; Secondly, printing equipment generally has requirements for the parameters of water flow, water pressure, water quality cleanliness, etc., we should pay attention to parameter pairing in the selection of chiller to determine the appropriate parameters; Finally, the printing equipment has high requirements for the pipe material of the chiller, the internal water quality should use clean water quality, the circulating water pipe, water tank, accessories, etc., can not be polluted by water pollution, and can be specially customized for special cases, using 304 stainless steel or titanium tube evaporator.

The above is the relevant introduction of printing equipment equipped with chiller, I hope it can help you. In the configuration of the chiller, it is necessary to choose the appropriate machine and installation mode according to the actual needs and conditions to ensure the stable operation of the equipment and improve production efficiency, at the same time, pay attention to maintenance and maintenance to ensure the normal operation of the machine.

Source: coolingstyle