How often should laser cutting lubricating oil be applied

It is generally recommended to lubricate the laser cutting machine once per hour, and the specific time can be adjusted according to the actual situation.

The function of lubricating oil
Laser cutting machines require the use of lubricating oil during operation to reduce friction and wear, protect various components of the machine, and extend the service life of the machine. The use of lubricating oil can also improve the efficiency and accuracy of machine operation.

Instructions for using lubricating oil
Lubricating oil is usually sprayed onto the cutting head and cutting area of a laser cutting machine using an injector. In order to ensure the sufficient function of lubricating oil, it is necessary to spray lubricating oil in an appropriate amount, not too much or too little, otherwise it will affect the normal operation of the machine.

The service life of lubricating oil
The service life of lubricating oil needs to be adjusted according to the actual situation. It is generally recommended to lubricate the laser cutting machine once per hour. If the machine has been working for a long time, the oiling cycle can be appropriately accelerated. In addition, in high-temperature environments, the service life of lubricating oil also needs to be correspondingly shortened.

Precautions
1.When choosing lubricating oil, one should choose lubricating oil specifically designed for laser cutting machines to ensure lubrication effect and service life.
2.When oiling, attention should be paid to the operating status of the machine to prevent lubricating oil from spraying onto areas that do not require spraying.
3. Regularly check the use of lubricating oil. If the lubricating oil deteriorates or the fuel injector malfunctions, it needs to be replaced or repaired in a timely manner.

In short, the use of laser cutting lubricating oil plays an important role in the normal operation and service life of the machine. The service life of lubricating oil needs to be adjusted according to the actual situation and regular maintenance should be paid attention to.