Solution to laser rust removal machine only producing red lines without rust removal

Working principle of laser rust removal machine
Laser rust removal machine is a high-tech equipment that uses a high-energy density laser beam to instantly hit the surface of the object being removed, vaporize the dirt, and achieve rust removal effect. The laser beam of the laser rust remover can not only remove rust, but also remove substances such as paint and oxide scale. After rust removal, the surface of the object will become smooth, achieving the effect of cleaning without damaging the surface of the object.

The reason why the laser rust removal machine only produces red lines and does not remove rust
The reason why the laser rust remover only produces a red line without rust removal may be due to the following reasons:
1. Improper adjustment of laser light path. Once there is a deviation in the laser path of the laser rust removal machine, it will affect the irradiation effect of the laser beam, resulting in only red lines without rust removal.
2. The spot size is not suitable. The size of the light spot is directly proportional to the rust removal power. If the light spot is too small, the rust removal power will be insufficient, making it impossible to remove the rust, resulting in only red lines without rust removal.
3. Inappropriate working distance. The laser rust remover should maintain an appropriate distance from the working object. If the distance is not appropriate, it will cause the laser beam to be not strong enough to remove the rust, resulting in only red lines and no rust removal.

Solution method
The following measures can be taken to solve the problem of laser rust removal machine only producing red lines without rust removal:
1. Adjust the laser light path. Check if the optical path is normal and ensure that the laser beam has a normal irradiation effect.
2. Adjust the size of the light spot. Select the appropriate spot size according to work requirements to ensure sufficient rust removal power.
3. Adjust the working distance. Maintain an appropriate working distance and ensure that the energy of the laser beam is sufficient to remove rust.

Common faults
In addition to the problem of only drawing a red line without rust removal, laser rust removal machines also have other common malfunctions, such as:
1. Spot offset. It may be caused by improper adjustment of the optical path, unsuitable spot size, or inappropriate working distance.
2. Weak light spot. It may be due to insufficient rust removal power or the need to adjust the spot size for different rust removal objects.
3. Damaged optical fiber. Long term use or improper operation can cause damage to the optical fiber, which needs to be replaced in a timely manner.

In short, laser rust removal machine is a high-tech product that requires careful reading of the user manual and operation manual before use, and strict operation according to requirements to ensure the safety and efficiency of the laser rust removal machine.