How to solve the sudden stop of laser cutting

Possible reasons for the sudden stop of laser cutting
1. Insufficient power: Insufficient power of the laser cutting machine may cause a sudden stop during the cutting process. This may be caused by a problem with the laser pump.
2. Abnormal optical path: The deformation or contamination of mirrors in the laser optical path may also cause the laser cutting machine to stop working.
3. The material to be processed is not suitable for laser cutting: Some materials are not suitable for cutting with a laser cutting machine, which may cause equipment shutdown.
4. System error: The system of the laser cutting machine may have errors, such as circuit board malfunctions, software crashes, etc.

How to solve the problem of sudden stop in laser cutting
1. Check power: If you suspect that the laser power is insufficient, please check if the pump is functioning properly and replace components or perform repairs if necessary.
2. Check the optical path: Check whether all mirrors of the laser are deformed or contaminated. If so, they need to be cleaned or replaced.
3. Check the material: Ensure that the material to be cut is suitable for use with a laser cutting machine. If not suitable, please try using other processing methods.
4. System maintenance: Check if there are any errors in the system. If so, try to solve the problem or contact the manufacturer for repair.