Laser cutting machine Y axis motor in the process of rotation sound?

Using + and - axis value directions in Lightburn

Y-Axis doesn’t move and makes sounds

6445G Controller Z Axis readings will not show correct values

6563F moves manually on the panel according to Z-axis, and the cutting head does not move.

When RDC6563F is used, XY axis does not move manually

XY axis does not reset

During power on and reset, the X axis stopped after touching the limit switch, while the Y axis was still running slowly at the origin.

Switch to the manual state, press the Z+and Z - buttons on the operation panel, and the Z-axis motor will not move

When pressing Z - or Z+for a longer time (about 3-4S), the Z axis will go down or up all the time, and it is normal to press Z - or Z+for a shorter time.

The panel did not prompt hard limit protection when Z-axis reached the hard limit switch

When the RDC6442S is operated, the graphics super format is automatically divided. The laser first cuts in the X direction and then does not emit light. The U axis starts to feed materials to a certai

Press Z-axis to move manually on the panel, and the cutting head does not move

How to adjust the step distance of Axis Z.

The panel did not prompt for hard limit protection when Z-axis reached the hard limit switch.

XY axis cannot be limited

The Z-axis makes a sound when it rises and falls

A-axis tool cannot test deflection angle

The circular cutting is not closed, the straight line is not straight, the XY axis jitters