Under what circumstances should the output power of the laser cutting machine be increased?

Aaron

2024-04-12

116

1

0

1. Adjust the machine assembly to improve cutting efficiency.Guide rail: When installing the guide rail, it must be parallel. If the guide rail is not parallel, there will be resistance during the operation and development of the machine equipment. The workpiece designed by cutting will have serrated edges. Therefore, the Y-axis guide rail must ful...

Abel

2024-04-12

118

1

0

If it is a machine, there will be losses, and the same goes for metal material laser cutting machines. In the long-term development and use process, we will definitely affect the existence of some more or less losses, such as slow cutting speed, poor cutting accuracy, and so on. Many people can think that it must be a decrease in laser power. In fa...

Williams

2024-04-12

143

1

0

There are several reasons and troubleshooting methods:1. When the vertical light is incorrect, please adjust the vertical light and readjust the light path if necessary.2. If the focal length is not adjusted properly, please refocus.3. The voltage is unstable, the voltage is low, and the laser current is too small. You need to replace a larger vol...

Carey

2024-04-09

125

1

0

With the continuous improvement of industrial production level, the industrial pollution and waste generated in the production process are also increasing, and more and more cleaning equipment is needed. Traditional cleaning methods have gradually been phased out, and laser cleaning, as a high-tech cleaning method, is increasingly being valued by p...

Kevin

2024-04-07

115

1

0

(1) PeelingThis is due to the lack of molten pool formation in the matrix, and the lack of metallurgical bonding between the powder and the matrix. Possible reasons include: low power; Excessive powder content; The linear speed is too fast; The surface of the workpiece may have oil stains or electroplating layers.(2) CracksThe reasons for the app...

Aaron

2024-04-07

124

1

0

The production and manufacturing of lithium-ion batteries include three parts: electrode manufacturing, cell manufacturing, and battery assembly. Adding laser cleaning in three processes can greatly improve the level of battery manufacturing technology.1. Laser cleaning before electrode coatingThe positive and negative electrode plates of lithium...

Henry

2024-04-02

130

1

0

1. The lens has stains or scratchesSolution: If there are stains, you can use a cotton swab and alcohol to wipe the lens, beam expander, and focusing lens, wiping off the surface material. Remember not to use hard objects to wipe the lens; If there are scratches or other damages on the lenses, the only option is to replace the marking machine lens....

Cruise Wang

2024-03-30

172

1

0

The principle of a laser marking machine is to vaporize the surface of a material in an instant through the high temperature generated by laser focusing, and generally the color of the material itself is printed out.The color of metal laser marking mainly depends on the nature of the material, followed by the size of the laser force (i.e. power, ...

Silvano

2024-04-01

124

1

0

The causes of cracksDuring the fusion process, the high-energy laser beam rapidly heats up, causing a significant temperature gradient between the fusion layer and the substrate. In the subsequent cooling, the volume of the cladding layer and the substrate is inconsistent, which constrains each other and generates stress.During the growth process ...

Roderick

2024-04-01

169

1

0

Firstly, the focus position of the fiber laser cutting machine affects the cutting accuracy, especially the diameter of the focal spot. The diameter of the focal spot should be as small as possible to produce a narrow slit; The diameter of the focal spot is directly proportional to the depth of focus of the focusing lens. The smaller the depth of f...

Jack Wilborn

2024-03-27

131

2

1

Summary:1. Metallurgical bonding between coating and substrate, with high bonding strength;2. The hardness and thickness of the cladding layer are well controllable;3. The dilution rate of the cladding layer is low, the grain size of the cladding layer is fine, the surface hardness is high, and the wear resistance is good;4. High powder utilization...

Liam

2024-03-26

110

1

1

Laser crystal carving technology is currently the most advanced and popular glass carving processing method internationally. It combines precision laser carving with transparent crystal materials to create lifelike three-dimensional images and textures, as well as impressive optical effects.The principle of crystal engraving is similar to that of...

Cyril

2024-03-23

154

1

0

A group of researchers from the Fraunhofer Institute of Applied Optics and Precision Engineering IOF and the University of New Mexico successfully cooled silica glass by 67 Kelvin for the first time using optical laser cooling. Researchers from Jena and Albuquerque have published their results in the journal Optics Letters.Cutting, drilling, weld...

Abel

2024-03-22

137

1

1

1. More environmentally friendly: No need to use any chemical agents or cleaning liquids, the cleaned waste is basically solid powder, small in size, easy to store, recyclable, non photochemical reaction, and does not produce pollution.2. Good effect: Laser cleaning is non abrasive, non-contact, and has no thermal effect. It does not generate mec...

Tory

2024-03-21

132

1

0