Assuming that i have cut optimization by layer and i have only 1 layer with multiple passes to cut, is it possible to move the Z axis to raise it between one pass and the next with a pre-set distance?

Miller

2023-10-13

216

1

0

Running Lightburn on the F1. I have several different files but every time I open a file to engrave metal I have to click a tab and enable the red laser in order for it to engrave. Is there a way of enabling the red laser in the file itself or the machine settings?

Kevin

2023-10-12

162

1

0

Hi. Does anyone know if it is possible to print the lightburn grid onto a piece of wood. I want to be able to place a piece of wood work I have done in the exact place on the wood i use to put my item to print on,as it is on the grid. The shapes are not round or square so this would ensure I print in the correct place on the items. Is this possible...

Marshall

2023-10-12

128

1

0

Good day, I recently purchased the sculpfun s6pro I got it to produce once about a week ago now today when I set up the program all the windows seem to pop up EXCEPT the laser window to control the machine, what I am I missing or doing wrong, also I try using the homing button and it tells me “ homing cycle not enable in GRBL settings “...

Keegan

2023-10-12

178

1

0

When i connect my xTool P2 via the usb cable i get a message stating the "port failed to open. Maybe in use? When i connect to my Sculpfun the port works laser connects so i know the port is open not asleep. i tried reverting to a previous update and no success. any ideas?

Henry

2023-10-11

160

1

0

I’ve read a few threads on this, but they still don’t make sense to me.I have a file I’m trying to split for an oversized project. When I do the cut objects function, the filled objects become open paths. I would have thought they would close automatically, but apparently not.Is there a fix, other than going node by node and drawi...

Robert Evans

2023-10-11

197

1

0

Hi,i want to add a layer whith rectangle which is not outputed to show what size is my working wood - i use A3 and A4 pieces.The problem is, that the origin is moved to this layer rectangle even when disabling the output od the layer. This may be useful but in my scenario its not good.Can you add a setting to move origin when disabled or keep posit...

jessie

2023-10-10

132

1

0

During laser processing, the cooling water temperature of the laser chiller has a significant impact on the power of the CO2 laser. If the temperature of the cooling water is too high, it can lead to a decrease in laser power and may even cause damage to the laser. So, how to adjust the cooling water temperature to keep the laser in optimal working...

Jen

2023-10-10

149

1

0

Femtosecond laser has the characteristics of narrow pulse width, wide spectrum, and high peak power, making it an ideal tool for scientific research and industrial processing. Fiber optic femtosecond laser systems have rapidly developed with advantages such as high output power, good beam quality, and simple structure. However, due to the inherent ...

John Trant

2023-10-10

121

1

0

have been looking all through LB, looking for list of what all types of files that will run on LB. Is there a list I can find and where?

Christian

2023-10-09

166

1

0

just curious to know if Lightburn in any way controls the laser module fan? Mine quit working and I’m trying to run down the possibilities.

Nugent

2023-10-09

154

1

0

Very new to designing in LB or any other program for that matter.Is it possible to define a specific angle of a straight line “rising” from horisontal?Help is much apreciated - Thank You

Vasili

2023-10-09

169

1

0

When I’m burning a project, sometimes the laser freezes on the same spot and will burn into the project continuously. The laser doesn’t respond in Lightburn to pause, this time it did to stop, but usually I have to turn off the laser manually. It’s a longer ray5 20w.

Gilbert

2023-10-07

141

1

0

When you accidentally delte something from the art library where does it go? I deleted something by mistake.

Cyril

2023-10-07

154

1

0

I am pretty new to Lightburn and am still switching back and forth to XCS as well.Question - I am using the same text in XCS and Lightburn and using the same width and height settings and getting completely different results with the two. XCS is cutting where I need it to but Lightburn is not.I am trying to cut the letters at 2.5" height. In the ...

Darren

2023-10-07

130

1

0