Laser cutting of PVC has advantages such as high precision, fast speed, and beautiful edges. With the intelligent control system, processing tasks can be switched freely, and the processing method is flexible and highly automated. However, in order to achieve smooth processing without problems such as black edges, there are also some areas that nee...

Abel

2024-08-01

129

0

0

Reflective film is a type of reflective film material made using microprism technology, synthetic resin technology, thin film technology, and other processes. Based on the principle of reverse reflection of light, reflective film can reflect the light emitted by the light to illuminate the direction of the light and remind relevant personnel of the...

Kevin

2024-07-31

115

0

0

1. Perforation problem of carbon steel thick plateThe issue of perforation time accounts for a large proportion in thick plate processing, and various laser manufacturers have developed their own perforation plans. The most representative one is energy perforation (blasting), which has the advantage of fast speed (1 second, taking t16mm as an examp...

David

2024-07-30

128

1

0

1. Carbon steelCarbon steel is generally cut using oxygen during laser cutting, which can be divided into positive focus cutting and negative focus cutting. The cross-section of positive adhesive cutting is a glossy or frosted surface, while when using high-power equipment, negative adhesive cutting can be used. The cutting section quality of mediu...

Tory

2024-07-30

127

0

0

1、 The optical path is not parallelDuring laser assembly, there may be situations where the optical path is not parallel, resulting in optical center deviation. In this case, it is necessary to readjust the optical path to make it parallel in order to solve the problem of optical center offset.2、 Lens wear and tearThe optical components in laser c...

Robert Evans

2024-07-29

171

1

0

Controlling the focus in laser cutting usually involves the following steps: 1. Adjusting the laser beam: Firstly, it is necessary to adjust the output power and wavelength of the laser to ensure that the quality and intensity of the laser beam are suitable for cutting materials.2. Focusing lens: Use a focusing lens to focus the laser beam into...

Farouk

2024-07-26

201

1

0

1. It is necessary to clean the dirt on the machine tool and guide rail every working day to keep the bed clean. At the end of the day, turn off the air source and power, and at the same time, exhaust the residual air in the machine tool pipe.2. If leaving the machine for a long time, turn off the power to prevent non professionals from operating...

Jen

2024-07-26

166

0

0

Laser marking machines, as an important tool for improving product identification quality and production efficiency, are increasingly widely used in the manufacturing industry. Faced with numerous laser marking machine brands and models in the market, choosing a device that suits the needs of one's own enterprise has become an important task. This ...

RTP

2024-07-25

140

0

0

The automation and digital control of metal laser cutting machines are mainly achieved through the following key steps and technologies:1、 AutomationAutomatic loading and unloading system:The automated loading and unloading system can automatically feed the raw materials to be cut into the laser cutting machine and automatically take out the fini...

JOST

2024-07-24

127

1

0

Handheld laser welding machine, as an emerging welding tool, works by converting electrical energy into laser and melting the welding wire and base material through high temperature to achieve welding. The following are common problems and their solutions for this device:1. Excessive wear of the protective lens of the welding gun head: The protec...

Silvano

2024-07-24

144

0

0

1. Unstable laser outputUnstable laser output is one of the common faults in fiber lasers, which may lead to unstable processing quality or even processing failure.Possible reasons:(1) Laser lens contamination(2) Poor heat dissipation of laser(3) The laser power supply is unstableresolvent:(1) Timely clean the lenses inside the laser(2) Check if th...

Andre J

2024-07-23

168

1

0

With the widespread application of laser marking machines, their maintenance methods have also received widespread attention. In summer, not only is the temperature high, but the daytime is also relatively long, which means that every summer is the high-intensity working period of laser marking machines. Below are the maintenance methods for summer...

さいと康成

2024-07-22

151

2

0

Error 1: When carving fabric, the laser will burn through the materialThe first step in avoiding burning through fabrics when using laser engraving/cutting machines is to understand which fabrics can withstand this process and the temperature they can withstand. Durable fabrics such as denim, canvas, and leather can withstand higher temperatures du...

Ruddy

2024-07-20

127

1

0

1. Regularly clean the equipmentDuring the use of the equipment, dust and debris will accumulate, which will affect the output power and work efficiency of the laser, and also accelerate the wear and tear of the equipment. Therefore, it is essential to regularly clean the equipment. When cleaning, be careful not to use cleaning agents with chemical...

Noah

2024-07-19

181

0

0

1. The focal length was not adjusted properly, please readjust the focal length.2. The CW method of the marking software is not selected, and the light will be weak. The CW method is selected.3. The cavity, total reflection mirror, half reflection mirror, and beam expander are not properly adjusted. Please readjust them.4. The laser did not hit th...

Cyril

2024-07-12

122

1

0