日本語

Nanjing University of Science and Technology has made new progress in the field of programmable lensless holographic cameras

59
2025-04-14 10:29:58
翻訳を見る

Recently, Professor Chen Qian and Professor Zuo Chao's research group from the School of Electronic Engineering and Optoelectronic Technology at Nanjing University of Science and Technology proposed a minimalist optical imaging method based on programmable masks - programmable Fresnel zone aperture lensless imaging technology. The related achievement, titled "Lensless Imaging with a Programmable Fresnel Zone Aperture," was published in the top international journal Science Advances. Zhang Xu, a master's student from the School of Optoelectronics at Nanjing University of Science and Technology in 2022, and Wang Bowen, a doctoral student from the School of Optoelectronics in 2019, are co first authors. Professor Chen Qian and Professor Zuo Chao are co corresponding authors, and they are the first completion unit and communication unit.

Traditional optical imaging systems mainly rely on the collaborative cooperation between image sensors and optical lenses to achieve the recording and focusing of optical signals separately. In recent years, with the rapid development of applications such as mobile photography and wearable devices, image sensors have achieved miniaturization and low cost, basically meeting the needs of most application scenarios for lightweight and economy. However, optical lenses, especially high-performance lenses, still face problems such as large size, heavy weight, and high manufacturing costs, which seriously restrict the application of imaging systems in scenarios with high lightweight requirements such as virtual reality (VR), augmented reality (AR), and human-computer interaction. This has become a key bottleneck that currently restricts the overall performance improvement and application expansion of the system.

Lens free imaging technology introduces a front-end optical encoding mask to replace traditional lens control of the light field, and combines back-end digital computing to demodulate the light field information, effectively reducing the cost and volume of traditional optical imaging systems, and achieving high-dimensional perception and phase inversion of incoherent light fields. However, existing static masks have fixed mask structures and system parameters that are difficult to flexibly adjust according to scene requirements, which makes the system prone to aliasing artifacts, reconstruction pathology, and other problems under complex or non ideal conditions, affecting imaging quality and usability. Therefore, how to further improve system resolution, signal-to-noise ratio, and enhance adaptability to complex dynamic scenes while maintaining the basic architecture of "minimalist optics" for lensless imaging is a core issue and technical challenge that urgently needs to be overcome in this field.

To address the aforementioned issues, the research team innovatively introduced the concept of "encoding regulation" and proposed a minimalist optical imaging technique based on "programmable masks" - the LenslessImaging with a Programmable Fresnel Zone Aperture (FZA) lensless imaging method (LIP). By dynamically displaying FZA patterns with spatial offset on programmable masks, LIP can achieve sub aperture information modulation and acquisition in the frequency domain, and fuse the data of each sub aperture using parallel reconstruction algorithms to obtain high-resolution, high signal-to-noise ratio lensless holographic images (Figure 1).

 



Figure 1. Schematic diagram of programmable FZA lensless holographic imaging system. (A) Composition and schematic diagram of imaging system; (B) Lens free imaging framework and encoding control strategy based on joint optimization of spatial and frequency domains; (C) Small scale LIP lensless imaging module independently developed by the team

Source: opticsky

関連のおすすめ
  • The world's first tunable wavelength blue semiconductor laser

    Recently, researchers from Osaka University in Japan have developed the world's first compact, wavelength tunable blue semiconductor laser in a new study. This breakthrough paves the way for far ultraviolet light technology and brings enormous potential for applications such as virus inactivation and bacterial disinfection. The research results have been published in the journal Applied Physics Le...

    2024-11-23
    翻訳を見る
  • The Application of Femtosecond Laser in Precision Photonics Manufacturing

    The femtosecond laser emits ultra short optical pulses with a duration of less than one picosecond, reaching the femtosecond level (1fs=10-15s). The characteristics of femtosecond laser are extremely short pulse width and high peak intensity.Ultra short pulse trains can minimize residual heat, ensure precise material processing, and minimize incidental damage. Its high peak intensity can induce no...

    2024-04-02
    翻訳を見る
  • Semiconductor lasers will support both TE and TM modes

    Typically, for lasers in optical communication systems, waveguide designs are used to achieve a single transverse mode. By adjusting the thickness of the surrounding area of the cladding layer and the etching depth of the ridge in the ridge waveguide device, a single mode device can be obtained. The importance of lasers is reflected in the following aspects:A chip without ridge waveguide design an...

    2023-10-20
    翻訳を見る
  • Luxiner launches modular laser processing solution Multiscan HE

    Recently, Luxiner, the leading brand in the field of laser technology in the UK, announced the launch of MultiSCAN ®  The latest members of CO2 laser systems - Multiscan HE 10i, 15i, and 25i. These new systems are presented in a completely independent form, integrating power, PC, and software, providing users with comprehensive solutions.The Multiscan HE 10i, 15i, and 25i not only inherit the indu...

    2024-06-07
    翻訳を見る
  • Laser printing on fallen leaves can produce sensors for medical and laboratory use

    The manufacturing of sensors through 3D printing combines speed, design freedom, and the possibility of using waste as a substrate. In the circular economy model, various results have been achieved, and typically discarded residues are used as low-cost resources. A research team in Brazil has proposed a highly creative solution that involves printing electrochemical sensors on fallen leaves. The t...

    2024-05-16
    翻訳を見る