한국어

The breakthrough of coherent two-photon lidar overcomes distance limitations

149
2023-12-08 14:07:12
번역 보기

Schematic diagram of experimental setup
New research has revealed advances in light detection and ranging technology, providing unparalleled sensitivity and accuracy in measuring the distance of distant objects.

This study was published in the Physical Review Letters and was the result of a collaboration between Professor Yoon Ho Kim's team at POSTECH in South Korea and the Center for Quantum Science and Technology at the University of Portsmouth.

Coherent LiDAR has long been the cornerstone of ranging, but its ability is limited by the coherence time of the light source. In a groundbreaking initiative, researchers have introduced two-photon LiDAR to eliminate the range limitation imposed by coherence time, enabling accurate and precise ranging of distant objects with coherence time determined by the spectral bandwidth of far exceeding light sources.

The inspiration for this study comes from the recent work led by Professor Vincenzo Tamma, Director of the Center for Quantum Science and Technology, which utilizes two-photon interference of thermal light, surpassing coherence. Unlike traditional coherent lidar, coherence time is a limiting factor, and the second-order interference fringes in coherent two-photon lidar are not affected by the short coherence time of the light source and are determined by its spectral bandwidth.

The experimentally proven scheme utilizes a simple thermal light source, such as sunlight, interacting with a double slit mask, where two slits A and B are separated by more than the coherence length of the light source, as well as two cameras. The light emitted from two slits either travels along a known optical length path towards the first detector D1 or propagates at an unknown distance towards a distant object, and is detected by the second detector D2 after being reflected by it.

A recent study led by Professor Tamma, in collaboration with Bari University and POSTEC in South Korea, has theoretically demonstrated for the first time that even in the presence of turbulence, the distance of distant objects can be estimated by measuring the spatial correlation of light intensity detected by two detectors.

If either of the two slits is closed, phase dependent interference cannot be observed. The famous Hanbury Brown and Twist experiments were in this situation, paving the way for the development of quantum optics and quantum technology in 1954. In fact, in the standard HBT two-photon interference, due to the contribution of only one slit at that time, interference jitter can be observed by correlated measurements of the light intensity of the two detectors.

However, when both slits are open, one can observe an additional, but this time depends on the interference contribution of the phase, which depends on the unknown distance of the remote object, and is caused by interference between two possible two-photon paths from two different slits to two detectors, as mentioned earlier.

From a fundamental perspective, the generation of this phase dependent contribution is a highly counterintuitive effect and is at the core of this technological influence, which has now been experimentally demonstrated in Professor Yoon Ho Kim's laboratory at POTECH.

This new study indicates that the coherent company's two-photon LiDAR has robustness to turbulence and environmental noise, marking a significant leap in the applicability of LiDAR technology in challenging environments.

"This breakthrough opens up new applications of two-photon correlation in classical light, breaking through the boundaries previously believed to be possible for LiDAR technology," said Professor Tamma, co-author of the study. "Our coherent two-photon lidar technology not only overcomes the range limitations related to coherence time, but also exhibits extraordinary resilience in the face of external interference."

These findings may lead to the development of new sensing technologies based on the use of thermal optical correlation measurements. These products may be used in autonomous vehicle, robots, environmental monitoring and other fields.

The ability to measure distances beyond coherent time with higher accuracy and reliability may reshape industries that rely on precise distance measurement.

The research team envisions collaborating with industry partners and stakeholders to further develop and implement coherent two-photon lidar in the real world.

Source: Laser Net

관련 추천
  • Fujitsu collaborates to research and develop multi band wavelength fiber optic transmission technology

    Recently, Fujitsu and KDDI research company have successfully developed a high-capacity multi band wavelength multiplexing transmission technology using installed optical fibers.The new technology of the two companies can transmit wavelengths beyond the C-band by using batch wavelength conversion and multi band amplification technology.Expanding transmission capacity in remote areasTwo companies h...

    2023-12-05
    번역 보기
  • HENGTONG listed on the Fortune Global 500 list of brands

    Recently, the 2024 (21st) World Brand 500 ranking list exclusively compiled by World Brand Lab was released in New York, USA. HENGTONG brand participated in the selection for the first time, standing out from more than 8000 participating brands in 32 countries worldwide and ranking 395th on the "Top 500 World Brands" list. This year, there are a total of 21 new brands on the global list, of whic...

    2024-12-17
    번역 보기
  • What are double- and triple-stack hybrid stepper motors

    Of the three primary stepper motor designs — permanent magnet, variable reluctance, and hybrid — hybrid stepper motors are arguably the most popular in industrial applications, combining the best performance characteristics of permanent magnet and variable reluctance types.Hybrid stepper motors are constructed with a rotor made of two sections, or cups, with a permanent magnet between ...

    2023-09-16
    번역 보기
  • Laser additive manufacturing: monitoring during defect occurrence

    Researchers at the Federal Institute of Technology in Lausanne have resolved the long-standing debate surrounding laser additive manufacturing processes through a groundbreaking defect detection method.The development of laser additive manufacturing is often hindered by unexpected defects. Traditional monitoring methods, such as thermal imaging and machine learning algorithms, have shown significa...

    2023-12-06
    번역 보기
  • Japanese and Australian teams use lasers to search for space debris the size of peanuts

    It is reported that Japanese startup EX Fusion will soon reach an agreement with Australian space contractor Electric Optical Systems to conduct on-site testing of technology for tracking small space debris orbiting Earth.Image source: LeolabsEX Fusion, headquartered in Osaka, specializes in the laser business with the goal of achieving commercial laser fusion reactors. So far, nuclear fusion rese...

    2023-10-10
    번역 보기