English

What are the "unique secrets" of each family in terms of breaking the game and high reaction materials?

242
2023-11-06 14:44:36
See translation

Laser is considered a sharp sword that cuts iron like mud, but even sharper swords can have tricky moments. For example, in certain scenarios, there are materials with higher reflectivity, such as silver, copper, etc., known as "high reflection materials". High reflective materials have a low absorption rate for lasers, making them difficult to process and potentially causing equipment failure or even damage. For many years, it has been an important threshold for the laser cutting industry to try to overcome.

In addition to low absorption, when the high reflection material is not penetrated, it may cause higher power return light to return to the interior of the laser, damaging the laser. Therefore, traditionally speaking, laser cutting machines are both cautious and cautious in processing high reflective materials.

However, high reflective materials are a large group with extremely wide market applications. Whoever can conquer high reflective materials first can gain a foothold in the cruel market. Driven by market demand, some laser companies have gradually explored ways to break through high resistance barriers in recent years to meet diversified processing needs. Here are some ways for companies to break the situation:

01 Blue laser
The laser emitted by CO2 laser is in the infrared band (usually 10.6um), which performs well in many industrial applications. However, it is not ideal for high anti metal processing in special bands. So one possible approach is to bypass this high reflectivity band and replace it with a shorter wavelength blue laser (usually in the range of 400-500nm). Using blue light laser processing can not only improve the absorption rate, but also improve the splashing problem caused by infrared laser processing.

As a rising star in the blue laser industry, compared to mature infrared and green lasers, it is at most considered a little brother. In September 2020, the Guangdong Guangdong Guangdong Hong Kong Macao Greater Bay Area Hard Technology Innovation Research Institute (referred to as the "Hard Science Institute") launched the 500W series semiconductor blue laser, and later launched the 1000W series. This series of products is mainly used for welding, cladding, 3D printing, etc. of high reflective materials, which not only fills the domestic gap in this field, but also holds a leading position in technology worldwide.

Lithium ion battery welding, electronic component processing, and other scenarios require the processing of copper, a common high reaction material. After testing by the Institute of Hard Science, the power required to use a conventional infrared laser is about 4000 watts, while a blue laser only needs 400-800 watts to achieve processing. At the same time, due to the high absorption rate of blue light by copper, the process window is greatly increased, and the welding effect can be finely adjusted through parameter control to achieve "splash free welding". In addition, blue light welding of copper metal also has significant advantages in speed, at least 8 times faster than infrared laser welding.

02 Optimize fiber optic output head
In fiber laser machines, there are also thorny high reflection issues. In order to solve this problem, Ruike Laser chose to start with the laser head.

In principle, the return laser caused by high reflectivity materials is first and foremost affected by the output fiber optic cable head. Returning lasers can easily cause heat or even damage to the output optical cable. In order to ensure the safety of the output optical cable, Ruike Laser adopts a new QBH fiber output head and adds a primary return light stripping device on top of the original one. This highly reflective design can strip most of the return laser in the first time, combined with a water-cooled heat dissipation design to reduce the thermal impact on the output head of the optical cable.

In order to verify the performance of the new fiber output head, a high reflection test was conducted on the RFL-A1500D laser equipped with this output head. The overall testing approach was to simulate the user's usage environment, even exceeding the actual working conditions. After a rigorous welding test at the focal point, 90 ° perpendicular to the surface of red copper, although the surface of red copper has always been in a mirror state and a continuous stream of laser returns to the fiber output head, the core device has remained at normal operating temperature and is not significantly affected by the return light.

In addition, there are also ideas such as using swing welding heads and composite welding heads to avoid high reaction problems. With the popularization and application of lasers, they have emerged in various industrial manufacturing fields such as material processing, communication, information processing, medical beauty, scientific research and military. However, homogenized competition is becoming increasingly fierce, and exploring new ideas and opening up the new blue ocean will become the future development trend. As high reflective materials are "conquered" by lasers, this will bring new growth points to the laser processing industry.

Source: OFweek

Related Recommendations
  • Significant progress made in 808nm high-power semiconductor laser chips

    The R&D team of Xi'an Lixin Optoelectronics Technology Co., Ltd. (hereinafter referred to as "Lixin Optoelectronics") has made significant progress in 808nm high-power semiconductor laser chips through continuous technological breakthroughs.808nm semiconductor laser, as an ideal and efficient solid-state laser pump source, plays an important role in advanced manufacturing, mechanical processin...

    2024-06-14
    See translation
  • Microstructure evolution and mechanical properties of Ti-6Al-4V alloy prepared by dual ultrasonic vibration assisted directional energy deposition

    1. Research backgroundDirected energy deposition (DED), as an efficient and economical technology in the field of additive manufacturing (AM), is widely used in the manufacturing of metal materials. However, its high heating and cooling rates, as well as significant temperature gradients, often lead to rapid solidification, forming cross layer columnar grains and internal defects, seriously affect...

    03-21
    See translation
  • Integra Optics launches groundbreaking XGS-PON and GPON combined OLT SFP+optical transceivers

    Infinite Electronics brand and innovative operator level global supplier of fiber optic components, Integra Optics, announced the launch of its latest innovative product, the XGS-PON and GPON combination OLT SFP+BiDi optical transceiver module. This module integrates the passive optical network OLT and GPON OLT optical modules of XG (S), promoting seamless network rate deployment within the optica...

    2024-04-11
    See translation
  • Observation of nanoscale behavior of light driven polymers using combination microscopy technology

    Expanding our scientific understanding often boils down to observing what is happening as closely as possible. Now, researchers from Japan have observed the nanoscale behavior of azo polymer films and triggered them with lasers.In a study published in Nano Express last month, researchers at Osaka University used a combination of cutting-edge scanning high-speed atomic force microscopy and optical ...

    2024-03-12
    See translation
  • Germany has developed a fast, accurate, and wear-resistant laser drilling CFRP process

    Recently, scientists from the Hanover Laser Center (LZH) in Germany announced the successful development of an automated laser drilling process that can promote the processing of carbon fiber reinforced plastics (CFRP). They stated that this is particularly valuable in applications such as lightweight structures and sound insulation.Composite materials such as carbon fiber reinforced plastics (CFR...

    2024-03-06
    See translation