English

Breakthrough! Extending the lifespan of solar panels to 50 years using lasers

74
2024-04-30 15:11:39
See translation

Recently, the National Renewable Energy Laboratory (NREL) under the US Department of Energy has made a revolutionary breakthrough by developing a concept validation method aimed at completely removing polymers from solar panel manufacturing, thereby achieving more efficient and environmentally friendly recycling.

Solar panels have always been praised for their recyclability. However, the thin plastic layer used in the manufacturing process poses challenges that hinder the effective recovery of valuable materials such as silicon and silver.

To solve this problem, NREL's research team has taken a different approach and proposed an innovative solution of directly implementing glass to glass welding in solar cells.

The core of this solution lies in utilizing infrared femtosecond laser technology. By precisely controlling the laser pulse, energy is focused on a specific area of the solar panel in an extremely short amount of time, forming a sturdy and durable glass to glass weld. It is worth mentioning that femtosecond laser technology has been widely applied in the field of medical ophthalmic surgery, such as cataract surgery, and its safety and reliability have been fully verified.

Through laser welding, the demand for plastic laminates in solar panels is completely eliminated, greatly simplifying the recycling process. After the lifespan of the battery panel, these modules made by laser welding can be easily broken, and the glass and metal wires inside can be smoothly recycled, while the silicon material can also be reused.

"Most recyclers generally believe that polymers are the main problem that hinders the recycling process. The emergence of our technology undoubtedly brings new possibilities for the recycling and utilization of solar panels," said David Young, senior scientist at the Efficient Crystal Photovoltaic Group of the NREL Department of Chemistry and Nanoscience.

This research result has been published in the IEEE Journal of Photovoltaics. The research team pointed out that laser welding technology has a wide range of applicability, not only suitable for silicon materials, but also can be used in combination with various materials such as perovskite and cadmium telluride. Due to the highly focused nature of the laser, the heat generated is limited to a very small range and will not cause damage to the battery material. Meanwhile, the strength of the welds inside the glass is equivalent to that of the glass itself, ensuring the long-term stability and durability of the module.

Young further explained, "As long as the glass itself is not cracked, there will be no problems with the weld seam. Moreover, due to the absence of polymers between the glass sheets, the hardness of the welding module has been significantly improved. Our research shows that by appropriately installing and modifying the embossing characteristics of rolled glass, the welding module can become sufficiently hard to meet the requirements of static load testing."

In the past, researchers have attempted to use nanosecond lasers and glass frit fillers for edge sealing, but the results were not ideal. The brittleness of the welds makes them unsuitable for outdoor module design. In contrast, the femtosecond laser welding technology developed by NREL achieves excellent sealing strength at extremely low cost, providing strong technical support for the recycling and utilization of solar panels.

This study is supported by the Durable Module Materials Alliance, which is committed to extending the lifespan of solar panels to 50 years or even longer. Through NREL's innovative laser technology, we are expected to achieve more efficient and environmentally friendly recycling of solar panels in the future, contributing to the sustainable development of renewable energy.

Source: OFweek

Related Recommendations
  • New technology from Swedish universities enables real-time laser beam forming and control

    Dr. Yongcui Mi from Western University in Sweden has developed a new technology that enables real-time laser beam shaping and control for laser welding and directional energy deposition using laser and metal wire. This innovative technology draws on the mirror technology used in advanced astronomical telescopes.Adaptive beam shaping using deformable mirror technology (Image source: Western Univer...

    2024-12-19
    See translation
  • Assisting Gas Mixing to Promote the Development of Fiber Laser Technology

    Just ten years ago, fiber laser cutting machines were considered experts in thin plates. The stores quickly realized that they had to invest in them to compete, at least by reducing their instrument materials. For high-quality sheet metal cutting, CO2 laser is still the way to go. Of course, fiber lasers can cut thicker blanks, but the quality is not very good, and their speed advantage almost dis...

    2024-01-11
    See translation
  • GOLDEN laser die-cutting machine will be exhibited at UPAKEXPO 2024

    At the UpakExpo 2024 exhibition to be held in Moscow at the end of January, Chinese company Golden Laser will showcase for the first time two laser die-cutting machines focused on the printing, labeling, and packaging markets in Russia.The Golden Laser LC350 is a web machine designed to handle labels printed on digital and flexographic printing machines. It can cut, die cut, and kiss cut paper, pl...

    2024-01-12
    See translation
  • Trumpf collaborates with Mercedes Benz to focus on digital real-time laser maintenance

    In the era of smart factories, Mercedes Benz monitors all fast lasers in its global production network based on cloud, significantly improving system resilience and reducing the risk of machine downtime. The connection between the Mercedes Benz digital ecosystem MO360 and the Trumpf laser for digital prediction services has helped achieve very good dynamic maintenance, and achieved demand based ...

    2024-06-17
    See translation
  • XTool enables pre-sale of F1 superfiber and diode laser cutting machines

    Tool has started pre-sales for the F1 Ultra, a 20 watt fiber and diode dual laser engraving machine. OEMs have stated that it is a win-win product and its so-called "flagship" model.Fiber lasers are mainly used for metal materials and usually work faster than diode lasers, but other materials have better performance when using diode lasers. F1 Ultra aims to bridge this gap by using a power of 20W ...

    2024-05-09
    See translation