Is there a way to print or otherwise display material library data?I have two similar (extensive) libraries and it’s pretty cumbersome to load one, expand the parents, dig out the settings, write them down, open another library, etc, etc.

Cyril

2023-09-02

383

1

0

I want to engrave into powder coated steel through masking tape so that I can leave the masking tape in place and paint the engraved areas. Anyone have any settings that work for this process using a Galvo laser. Any help would be appreciated.

Gilbert

2023-09-02

287

2

0

I have my laser mounted secure, my camera is mounted secure, I run the calibration and the alignment, and everything is good for a while, then its out of align, I have to re calibrate it for it to work, every time.

Clarence

2023-09-02

220

1

0

3d engraving when you have say a square image and you want to make it round, i know how to use the mask i do that but the sides and top and bottom are white and dont engrave is there a way to add the black to engrave those areas ? if this makes sence ?here is a picture you see the circle and it has white i want to make that part so that it engrav...

Keegan

2023-09-01

273

1

0

I’m engraving some Golf Tees. 10 at once. Positions are set. I pasted 10 small .jpg images of my lettering into the very tight tolerances of the thin tees. All set. Then when the burn started, the laser went way out of the printing zone, with long filled traversal areas on both sides of the lettering. See picture attached. what do I need to d...

Marshall

2023-09-01

305

1

0

Bonjour, je cherche comment graver un motif sur une pièce déjà découpée. J’ai téléchargé un motif etje voudrais graver uniquement sur les pièces présentent sur mon plateau, sans que ça dépasse.J’arrive à superposer le motif à ma pièc...

Robert Evans

2023-08-31

260

1

0

When I select the ‘square’ option then put text inside, I only get one cut/layer line, so it all gets cut out or burned. I want to make and cut patches without cutting the Lester’s out inside of it

Henry

2023-08-31

312

1

0

I have a new issue with my Xtool D1 Pro 20W, I have the fire button set to 1% which I have used for over a year with no issues. However now when I try and frame the laser is burning into the workpiece.I have checked and $$30 is set correctly to 1000 and $$32 is set to 1I have re installed the Xtool profile as well as Lightburn. I have also rolled b...

Jamie

2023-08-31

346

1

0

Why does this happen in precision?

Vasili

2023-08-30

341

1

0

I have two problems . . .1. I have been trying to use pointer offset in the device settings but Lightburn generates an error on Start if I enter a negative value in the Y axis setting. This happens even if the laser head is placed well within the work area. I’ve seen this done in a YouTube video using Lightburn and my same make/model ...

Nugent

2023-08-30

339

1

0

HiAre there more detailed tutorials for using the line tool? I can’t find any…I drew myself a makers mark. I wish to thicken the lines. How do I do that?

Christian

2023-08-30

351

1

0

Hello all. I am a total novice and newbie to the world of laser cutters/engraversI have just purchased the Atomstack P7 M40. Seems a great little unit.My question is this. If I home the unit, its fine. But as soon as I try to frame a job the laser mount (not sure what the technical name for this is) seems to try and come to far back and then the ...

Patrick

2023-08-30

390

1

0

Does anyone know why I would be getting this random line going through lettering. Laser head is cleaned and it only does it with font. Images are all fine. Ideas?

jessie

2023-08-30

275

1

0

Hello,I am currently building a new CNC Machine (primary milling) which is using PlanetCNC. I want to have a ‘powerfull’ diode laser on the Z Tower of the machine.Can I use Lightburn for the Laser tasks on my milling machine with the PlanetCNC controller?Since I want to order a diode Laser can yo give me any advice for a module with go...

roy

2023-08-30

260

1

0

If object dia is 96mm do you set the steps per rotation 96000. Using a chuck rotary? When trying to put a 20mmx20mm square on a tumbler it comes out 20mm tall but real thin, not 20mm thick.

Patrick

2023-08-23

274

1

0