Polski

The world's first scalable optical quantum computer prototype has been launched

209
2025-02-12 14:21:10
Zobacz tłumaczenie

Canada's Xanadu Quantum Technologies has developed the world's first scalable optical quantum computer prototype. The company published an article in the latest issue of Nature detailing its design and construction process, and demonstrating how the prototype can be flexibly scaled up to the required scale. This breakthrough lays an important foundation for the development of large-scale quantum computing in the future.

The researchers adopted a modular design concept to construct this quantum computer. In the initial stage, they built a basic unit containing a small number of qubits, suitable for the most basic application scenarios. As demand grows, computing power can be expanded by adding more units of the same type. These units work together through a network to form a large computer. Each newly added unit or quantum server rack will increase the overall processing capacity.


System and main module schematic diagram. (Image source: Nature magazine, UK)


Researchers point out that thousands of such units can be connected through fiber optic cables to create large quantum computers with enormous processing power. Due to the fact that the entire system is based on photon technology, there is no need to combine photon components with traditional electronic components.

To validate this concept, researchers constructed a prototype system consisting of four server racks. The system uses 84 compressors to form a computer with 12 physical qubits. Among them, the first rack is equipped with an input laser, while the other three racks contain five main subsystems: quantum bit generation source, quantum bit storage buffer, optimization system for improving quality and generating entangled states, routing system for assisting entanglement and clustering, and quantum processing unit for executing the final computing task. It should be noted that since the system is entirely based on photon technology, it can operate at room temperature without the need for cooling equipment.

Researchers tested the performance of the system by creating a unique entangled state. The experimental results are satisfactory, indicating that the system can not only perform complex large-scale computing tasks, but also has a high degree of fault tolerance. This achievement not only demonstrates the enormous potential of quantum computing, but also provides new directions and possibilities for future technological development.

Xanadu stated that quantum computers have always faced two major issues: improving performance (error correction and fault tolerance) and scalability (networking), and now they have solved the latter.

The Aurora photon computer adopts a modular design, equipped with 35 photon chips and connected to a fiber optic length of 13 kilometers. They are divided into four similar units, distributed on four rack servers, and can achieve optical interconnection and networking.
Through fiber optic interconnection, up to 84 compressors and 36 photon number resolution detectors can provide 12 physical photon quantum bit patterns per clock cycle.

They plan to establish the first quantum data center in 2029, which will include thousands of servers and one million qubits.
In addition, American companies such as PsiQuantum and French company Quandela are also researching optical quantum computers.

According to Science Popularization China, on October 11, 2023, the internationally renowned physics academic journal "Physical Review Letters" published the latest research results of a Chinese research team in the field of photon computing.

The quantum computing research team composed of Pan Jianwei, Lu Chaoyang, Liu Naile and others from the Institute of Quantum Information and Quantum Technology Innovation of the Chinese Academy of Sciences, University of Science and Technology of China, cooperated with the Shanghai Institute of Microsystems, Chinese Academy of Sciences, and the National Center for Parallel Computer Engineering and Technology, and successfully built a 255 photon quantum computing prototype "Jiuzhang No.3", which again broke the world record for the number of controllable photons in quantum computers.

The "Jiuzhang No. 3" is the latest model developed and matured based on the previous "Jiuzhang" series of optical quantum computing prototypes, representing the highest level of technology in the field of optical quantum computing.

The research results indicate that compared to the previous quantum computing prototype "Jiuzhang-2" with only 113 photon manipulation capabilities, the "Jiuzhang-3" with 255 photons has increased its computational speed by approximately one million times in dealing with the specific complex problem of "Gaussian Bose sampling".

Therefore, "Chapter Nine No. 3" not only improved the ability of quantum computers to solve complex problems, but also created the latest world record for the superiority of quantum computing, providing solid technical support for the ultimate development of truly practical general-purpose quantum computers.

Photons, also known as photons, can transmit electromagnetic interactions at the speed of light. They were first proposed by Albert Einstein in 1905 and officially named by American scientist Gilbert Lewis in 1926.

In today's life, electronic devices such as computers and calculators that we come into contact with still belong to the category of classical computers. As the computing power of classical computers continues to approach the limit of Moore's Law, simply increasing the number of processors in classical computers is becoming increasingly difficult to meet the huge data computing needs of the future.

Unlike classical computers, quantum computers adopt the parallel computing characteristics of quantum mechanics theory to have more efficient computational performance.

Source: laserfair

Powiązane rekomendacje
  • TroGroup announces acquisition of Luxinar Ltd.

    Recently, TroGroup, a family owned laser giant operating globally in Austria, announced a major strategic move - the successful acquisition of Luxinar Ltd., a leading laser source manufacturer based in Hull, UK. This move marks a new level of TroGroup's technological leadership in the field of laser sources.Through this acquisition, Luxinar, with its approximately 200 elite team and over 25 years ...

    2024-08-03
    Zobacz tłumaczenie
  • Unlocking visible femtosecond fiber oscillators: progress in laser science

    The emergence of ultrafast laser pulses marks an important milestone in laser science, triggering astonishing progress in a wide range of disciplines such as industrial applications, energy technology, and life sciences. Among various laser platforms that have been developed, fiber optic femtosecond oscillators are highly praised for their compact design, excellent performance, and cost-effectiven...

    2024-03-28
    Zobacz tłumaczenie
  • Renishao provides customized laser ruler solutions for ASML

    Renishao collaborated with ASML to meet a range of strict manufacturing and performance requirements and developed a differential interferometer system for providing direct position feedback in metrology applications. Customized encoder solutions can achieve step wise improvements in speed and throughput.Modern semiconductor technology relies on precise control of various processes used in integra...

    2023-12-14
    Zobacz tłumaczenie
  • Panacol showcases a new optical grade adhesive on Photonics West

    Panacol will showcase new optical grade resins and adhesives for embossing and optical bonding applications at the SPIE Photonics West exhibition held in San Francisco, California, USA from January 30 to February 1, 2024.These new adhesives can be used for sensors in lightweight carpets, smart devices, and wearable devices in the automotive industry, or for generating structured light in projector...

    2023-12-12
    Zobacz tłumaczenie
  • The influence of post-processing methods on the fatigue performance of materials prepared by selective laser melting

    Researchers from Opole University of Technology in Poland have reported the latest progress in studying the effect of post-processing methods on the fatigue performance of materials prepared by selective laser melting (SLM). The related research was published in The International Journal of Advanced Manufacturing Technology under the title "Influence of post processing methods on fatigue performan...

    01-17
    Zobacz tłumaczenie