On November 30, Uniwin Laser released an announcement that the company's application for issuing shares to specific objects was approved by the CSRC for registration.Uniwin Laser has previously announced that it plans to issue no more than 90.27,066 million shares of the company to no more than 35 specific objects in compliance with laws an...
2022-12-0121700Recently, the Thin Film Optics Laboratory of Shanghai Institute of Optics and Precision Machinery, Chinese Academy of Sciences, cooperated with the Italian National Bureau of New Technology, Energy and Sustainable Economic Development to make new progress in the study of the spatial gamma ray radiation stability of laser films, providing data suppo...
2022-12-0125200Good grounded laser power supplyThe stainless steel laser cutting machine must be provided with good grounding protection, and the grounding wire shall be a special ground less than 4 Ω. Its necessity lies in:1. Ensure the laser power supply works normally2. Extend the service life of the laser tube3. Protect the machine from external interfe...
2022-11-3020400In recent years, the development of metal laser cutting machine has made the industry involved more and more extensive, and the market demand and competition among manufacturers have also promoted the development of metal laser cutting machine towards high-power direction, but this does not mean that small power metal laser cutting machine will "di...
2022-11-3036700A research group led by Hiroshi Amano, the 2014 Nobel Prize winner of the Institute of Materials and Systems for Sustainability (IMaSS) at Nagoya University in central Japan, in cooperation with Asahi Kasei, The first continuous wave laser emission of deep ultraviolet laser diode (wavelength to UV-C region) at room temperature in the world has been...
2022-11-3026200Recently, Yole Intelligence (a subsidiary of Yole Group), an internationally renowned market research company, developed a new semiconductor manufacturing laser equipment and technology report, and focused on introducing innovative technologies and market trends since 2017.This report provides an overview of laser technology trends, summari...
2022-11-3020600- RuidaThe graphics and actual graphics in the software are reversed from left to right or up to down
The graphics and actual graphics in the software are reversed from left to right or up to down
2022-11-2833510 Prompt "The machine has been protected" after starting the point
2022-11-2824310The border is normal, but the click to start does not respond. How can I solve this problem?
2022-11-2835710Although plastic gears are relatively "mature" recently, many products on the market still use steel gears. But in fact, it is difficult to get rid of the humiliation and worry about the use of plastic gears, which should be traced back to the application of plastic gears in other non critical applications of various toys.However, with the progre...
2022-11-2931000Laser radar is mainly composed of four system elements: laser emission, laser manipulation (scanning system), laser reception and information processing. The four systems complement each other, and then obtain a large amount of location point information in a short time, and realize 3D modeling based on these information.Laser emission: EEL...
2022-11-2925100Recently, the research team of Jiang Haihe, a researcher in the Medical Laser Technology Laboratory of the Institute of Health of the Chinese Academy of Sciences, cooperated with China Electronics Technology Group, and made important progress in the research of acousto-optic Q-switching technology in the mid infrared band: the lithium niobate (LiNb...
2022-11-2931400Recently, the State Key Laboratory of Strong Field Laser Physics of the Shanghai Institute of Optics and Precision Machinery, Chinese Academy of Sciences has made progress in achieving efficient bunching proton acceleration by driving plasma prisms with ultra strong vortex lasers. Related achievements were published on Applied Physics Letters under...
2022-11-2921300Laser cutting is to focus the laser beam on the material surface with a focusing mirror to melt the material, at the same time, use compressed gas coaxial with the laser beam to blow away the melted material, and make the laser beam and the material move relative along a certain trajectory, thus forming a certain shape of slit.Causes affect...
2022-11-2925800Throughout the development history of the laser control system industry, domestic substitution is an important driving factor. In terms of servo control system, in the field of medium and low power, domestic enterprises led by Bacchus Electronics have reached the international leading technical level, and Bacchus Electronics, Weihong and Aosendico ...
2022-11-2823401
- Sem Dados
Português
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski