I have had LightBurn on my CO2 (dsp) since the early days of LightBurn and it works great. But I’m adding an XTool Pro 20 watt diode. How do I go about getting a license for the diode/gcode? All I could find was how to upgrade from gcode to DSP.Thanks

Robert Evans

2023-06-15

381

1

0

I use a jpeg file to engrave a picture. The picture is not filling the full jpeg frame and to maximize the woodplate I rotated it about 20 degrees. The picture I want to engrave fits on the workspace, but the edge of the jpeg frame (as it is retangular) runs over the workspace. I believe this is the issue why LB is not starting to engrave this laye...

Henry

2023-06-15

289

1

0

he intentado varias veces descargar la última actualización y siempre es fallidaPodrían ayudarme de alguna manera para poder actualizar??Muchas gracias!!Un saludo

Jamie

2023-06-15

380

1

0

That laser will require g-code capability. Note that all versions of LightBurn support g-code devices. If you don’t need any DSP or Galvo laser capability then you would only require the g-code license.

David

2023-06-15

429

1

0

Im going to digg into some reading ASAP but anyone know where i boofed this up at , i homed , set my origin , framed it looked a little off not bad , fired and this is what i got lol. Did the negative values break it ? should i have cropped it then centered to my work ?

Tory

2023-06-15

402

1

0

IJ’ai un galvo CO2 de 30 watt, reçu avec EzCad, et connecté depuis le début avec LightBurn (beaucoup plus simple d’utilisation).Hier j’ai voulu changer de lentille pour la 1ere fois (de 210mm a 110mm), et j’ai changé les paramètres de config (donné par le constructeur), et biensur r&...

Keegan

2023-06-15

340

1

0

Newtec's Laser FlowPack700 is the ideal solution for customers who require cost-effective and sustainable technology and respect for product quality. With their innovative high production capacity and reduced plastic consumption, Newtec's laser packaging machines offer a fully automated service that is easy to use and environmentally friendly.&nbs...

Miller

2023-06-14

343

1

0

iKier, a pioneer in the laser engraving and cutting industry, has launched its latest innovation 48W/24W switching laser Cutter and engraving machine, the world's first laser cutting and power switching laser engraving machine.The iKier K1 Pro Max can carve up to 900mm/s, four times faster than other machines, maximizing productivity and ma...

Darren

2023-06-14

175

1

0

On May 26, 2023, the inventor of ALPD laser technology, Light Peak Technology, said at the performance presentation: "ALPD®5.0 laser display technology creates higher brightness, more comfortable viewing experience, better color accuracy through the way of light source control and matching software algorithms, which can achieve the maximum colo...

Cyril

2023-06-14

206

1

0

I have a new Latitool F50 and just installed lightburn. I’ve set starting position to Absolute Coords and am trying to use print and cut to line up a template. I do not have an alignment light. Can i turn my laser on low power to align? If so, how please?

Gilbert

2023-06-14

207

1

0

on a steel plate my buddy gave me yesterday with my 100mm lens.I ran my Fiber on it, engraving a 15mm x 15mm square on it with different settings. I FINALLY understand somewhat what Frequency does. I guy told me to consider it like Grit on Sandpaper.Speed is how fast you run your orbital sander. Power is how hard you press with it. Frequency coul...

Clarence

2023-06-14

227

1

0

How can change the fill start position (allways is from bottom) on the Y axis, I need to do it from top to bottom (I use rotor)

Terrelle

2023-06-14

300

1

0

Hi, using an Ortur lasermaster 2 with their chuck.I am commonly engraving on items around 7cm diameter. To save my remaining braincells I have chosen to set it for a 21cm circumference and for my 21 cm circumferential patterns it all seems to “join up” very nicely. If all the design is set to be “engraved in one session” whe...

Payson

2023-06-14

242

1

0

Using 20W diode w/xTool D1 and Lightburn updated 1.4.0 version software. Since update to 1.4 version of Lightburn the 20W diode power requires higher settings to cut same materials such as paper, 1/8’ bass wood. Recently cut 1/8 pressed wood at 200 speed and 50% power settings. Closed lightburn and reopened next day and now settings have doub...

Vasili

2023-06-14

293

1

0

Hi,I’m a newbie to the laser world so I’m hoping some can help me understand what I’m doing wrong. Basically when I use line, the vector image I am using is turning out fine, but as soon as I switch to fill, the engraving is wobbling at random points. I’m using same speed/power settings (1000/80 )on my Sculpfun 10W diode las...

Nugent

2023-06-14

387

1

0