Hello!After installing the extension kit, I luckily stumbled upon a post that I had to update my laser. I now just have installed the 20w upgrade and have been running samples. Do I need to make any changes in Lightburn to reflect this upgrade? Download or settings? I can hang, but I’m not a wiz when it comes to computer programs.Thank you!
2023-06-1219510Does anyone know why I am getting these pits, or random holes in the image and around the edge of my image in the glass?Settings are: Xtool D1 20w, Speed 7500, power 75% Bi-directional pattern, Line interval 0.100 mm, lines per inch 254.0, number of passes 1.
2023-06-1237210My DELL Latitude will not connect to XTOOL D1 PROI am using the correct configuration file but LB cannot find the XTOOL.
2023-06-1235910Coherent today announced the launch of its next generation ultra-low cost nanosecond pulsed ultraviolet laser, Matrix, for high-contrast marking applications in consumer products, industrial electronics, home appliances and packaging.In recent years, the increasing adoption of environmentally friendly non-contact laser marking in consumer devices...
2023-06-1029410Recently, the Attosecond Science and Technology Research Center of Xi 'an Institute of Optics and Machinery has made important progress in the research of ultrashort laser pulse light field measurement. The research team innovatively proposed a three-order nonlinear process all-optical sampling method based on perturbation, which can measure the pu...
2023-06-1027410BIOLASE is taking the necessary steps to optimize operations to capitalize on the growing business momentum of its market-leading dental lasers. The company believes that its revenue-generating strategy and prudent expense management, coupled with the recently completed share issue to strengthen the balance sheet, will enable it to achieve its sale...
2023-06-1029710I got my first laser Atomstack x20 a few days ago…and I noticed that It is very noisy and smells not good…So I’d like to connection via wifi because doing job from a distance…I tried to connect via Tibbo Vitual port, but when I command to frame, good job and It is start and then stops working in the actual work command&he...
2023-06-1031310I assembled the extension kit offered by Ortur that changes the work area from 400mmx400mm to 400mmx800mm. I changed the dimensions of the laser in Lightburn to match the new 400mmX800mm work area. However, the machine will not go outside of the original 400mmX400mm workspace. It gives me the error code:ALARM:2G-code motion target exceeds machine t...
2023-06-1030310I’m using the atomstack x30 and I wanted to check speed engraving things. So I found an image, set my power to 50 and my speed to 10000. It took about 12 minutes (4x5 image). I took the speed up to 15000, and it actually took 14 minutes. If I take it up to 20000 and I get 16 minutes. So I played around with settings until I found that 6500 wa...
2023-06-1039510Hi, Im new to the laser side and ready to start my first print and got it all ready to go except 1 thing. The file im looking to do has all the following and not sure order to do them in. Ive read that inner cut should take place before outer cuts. But what about engraving lines and lettering, should they go before I do the inner cut or after the i...
2023-06-1045210Hi,I would like to knw if i can replace Atomstack A10 pro 50w head with something more powerful? or is not possible?if yes, what do i need?thank you.
2023-06-1032010- LaserCoherent introduces 50W UV Femtosecond laser for cutting SiC wafers and stacking OLED displays
Coherent, a leader in industrial lasers for materials processing, today announced the introduction of a new industrial ultraviolet (UV) femtosecond laser, the Monaco, with an output power of 50 W, ideal for high-speed, high-volume wafer cutting and stacked OLED displays.The rapid growth of applications such as wafer slotting and display stack pre...
2023-06-0931310 Recently, the team of Gao Xiaoming, a researcher at the Institute of Optics and Light of the Hefei Institute of Physical Sciences, the Chinese Academy of Sciences, has made new progress in the simultaneous detection of NOx two-component in the static magnetic field Faraday rotation spectrum. The relevant research results were published in the inter...
2023-06-0919410Trimble has announced the X9 3D Laser Scanning System, a versatile reality capture solution for surveying, construction and engineering users. The X9 is designed to improve performance in more environments while leveraging Trimble's X-Drive technology for automatic instrument calibration, measurement-level self-tuning and laser designators for geog...
2023-06-0925410The Yellow DPSS Laser Market study provides a comprehensive study of the current stage of the market, covering the market size relevant to the assessment of sales volume, and provides a precise forecast of the market scenario for the projected period. It also focuses on products, applications, manufacturers, suppliers, and regional segments. The Ye...
2023-06-0936410
- Sem Dados
Português
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski