Português

The world's first scalable optical quantum computer prototype has been launched

216
2025-02-12 14:21:10
Ver tradução

Canada's Xanadu Quantum Technologies has developed the world's first scalable optical quantum computer prototype. The company published an article in the latest issue of Nature detailing its design and construction process, and demonstrating how the prototype can be flexibly scaled up to the required scale. This breakthrough lays an important foundation for the development of large-scale quantum computing in the future.

The researchers adopted a modular design concept to construct this quantum computer. In the initial stage, they built a basic unit containing a small number of qubits, suitable for the most basic application scenarios. As demand grows, computing power can be expanded by adding more units of the same type. These units work together through a network to form a large computer. Each newly added unit or quantum server rack will increase the overall processing capacity.


System and main module schematic diagram. (Image source: Nature magazine, UK)


Researchers point out that thousands of such units can be connected through fiber optic cables to create large quantum computers with enormous processing power. Due to the fact that the entire system is based on photon technology, there is no need to combine photon components with traditional electronic components.

To validate this concept, researchers constructed a prototype system consisting of four server racks. The system uses 84 compressors to form a computer with 12 physical qubits. Among them, the first rack is equipped with an input laser, while the other three racks contain five main subsystems: quantum bit generation source, quantum bit storage buffer, optimization system for improving quality and generating entangled states, routing system for assisting entanglement and clustering, and quantum processing unit for executing the final computing task. It should be noted that since the system is entirely based on photon technology, it can operate at room temperature without the need for cooling equipment.

Researchers tested the performance of the system by creating a unique entangled state. The experimental results are satisfactory, indicating that the system can not only perform complex large-scale computing tasks, but also has a high degree of fault tolerance. This achievement not only demonstrates the enormous potential of quantum computing, but also provides new directions and possibilities for future technological development.

Xanadu stated that quantum computers have always faced two major issues: improving performance (error correction and fault tolerance) and scalability (networking), and now they have solved the latter.

The Aurora photon computer adopts a modular design, equipped with 35 photon chips and connected to a fiber optic length of 13 kilometers. They are divided into four similar units, distributed on four rack servers, and can achieve optical interconnection and networking.
Through fiber optic interconnection, up to 84 compressors and 36 photon number resolution detectors can provide 12 physical photon quantum bit patterns per clock cycle.

They plan to establish the first quantum data center in 2029, which will include thousands of servers and one million qubits.
In addition, American companies such as PsiQuantum and French company Quandela are also researching optical quantum computers.

According to Science Popularization China, on October 11, 2023, the internationally renowned physics academic journal "Physical Review Letters" published the latest research results of a Chinese research team in the field of photon computing.

The quantum computing research team composed of Pan Jianwei, Lu Chaoyang, Liu Naile and others from the Institute of Quantum Information and Quantum Technology Innovation of the Chinese Academy of Sciences, University of Science and Technology of China, cooperated with the Shanghai Institute of Microsystems, Chinese Academy of Sciences, and the National Center for Parallel Computer Engineering and Technology, and successfully built a 255 photon quantum computing prototype "Jiuzhang No.3", which again broke the world record for the number of controllable photons in quantum computers.

The "Jiuzhang No. 3" is the latest model developed and matured based on the previous "Jiuzhang" series of optical quantum computing prototypes, representing the highest level of technology in the field of optical quantum computing.

The research results indicate that compared to the previous quantum computing prototype "Jiuzhang-2" with only 113 photon manipulation capabilities, the "Jiuzhang-3" with 255 photons has increased its computational speed by approximately one million times in dealing with the specific complex problem of "Gaussian Bose sampling".

Therefore, "Chapter Nine No. 3" not only improved the ability of quantum computers to solve complex problems, but also created the latest world record for the superiority of quantum computing, providing solid technical support for the ultimate development of truly practical general-purpose quantum computers.

Photons, also known as photons, can transmit electromagnetic interactions at the speed of light. They were first proposed by Albert Einstein in 1905 and officially named by American scientist Gilbert Lewis in 1926.

In today's life, electronic devices such as computers and calculators that we come into contact with still belong to the category of classical computers. As the computing power of classical computers continues to approach the limit of Moore's Law, simply increasing the number of processors in classical computers is becoming increasingly difficult to meet the huge data computing needs of the future.

Unlike classical computers, quantum computers adopt the parallel computing characteristics of quantum mechanics theory to have more efficient computational performance.

Source: laserfair

Recomendações relacionadas
  • Farnell provides its own branded 3D printing consumables

    Farnell stated that it will store a series of 3D printed filaments under its Multicomp Pro brand, targeting "design engineers, creators, and hobbyists."."With the growing interest and demand for 3D printing, we are pleased to provide our customers with a diverse range of 3D printer consumables aimed at meeting the quality standards required by engineers," added Steve Jagger Marsh, the company's pr...

    2024-06-03
    Ver tradução
  • Acousto optic modulation of gigawatt level laser pulses in the ambient air of Nature Photonics

    An interdisciplinary research group, including the German synchrotron radiation accelerator DESY and the Helmholtz Institute in Jena, Germany, reported that invisible gratings made of air not only are not damaged by lasers, but also maintain the original quality of the beam. The relevant research has been published in Nature Photonics under the title of "Acousto opt modulation of gigawatt scale la...

    2023-10-12
    Ver tradução
  • STL's new 160 micron fiber optic can meet emerging network and pipeline capacity requirements

    STL unveiled its new 160 micron fiber optic for the first time at the 2023 India Mobile Conference Trade Show.The company claims that its 160 micron fiber optic was conceptualized and developed at its Center of Excellence in Maharashtra, India, and its cable capacity is three times that of traditional 250 micron fiber optic. STL Company.After the launch of 160 micron fiber at the 2023 India Mobile...

    2023-11-01
    Ver tradução
  • Zygo showcases 3D optical metrology instruments on Space Comm

    Zygo Corporation, a business unit of AMETEK, announced that it will be showcased at the D28 booth of the Space Comm Expo held in Farnborough, UK from March 6th to 7th this year.Space Comm showcases the end-to-end supply chain of products, services, and applications that provide information and technological development for commercial aerospace enterprises, governments, and defense organizations, p...

    2024-03-01
    Ver tradução
  • The scientific research team has proposed a modeless Raman fiber laser using a traditional resonant cavity structure

    The pump source, gain material, and resonant cavity are the three elements that make up a laser. Due to the selective effect of the resonant cavity on the lasing frequency, multi longitudinal mode operation is one of the characteristics of fiber lasers based on traditional resonant cavity structures, manifested as periodic beat peaks in the radio frequency (RF) spectrum and periodic fluctuations i...

    2023-08-15
    Ver tradução