The fiber optic cutting control system is the control core of the fiber optic laser cutting machine. By sending signals to the laser and motor, the control system can accurately control the laser output and mechanical axis movement to complete the cutting and processing tasks. The fiber optic cutting system can also arrange the processing tasks, in...

Kevin

02-28

80

0

0

In recent years, the efficiency problem of metal processing has gradually been solved by fiber laser cutting machines, and common metals are mainly stainless steel, carbon steel, and aluminum plate. Until now, both stainless steel and carbon steel can be easily cut. As a high reflectivity material, cutting aluminum has always been a difficult probl...

Marshall

02-28

72

0

0

1. Choose high-quality optical componentsImportance: The accuracy and durability of optical components directly affect the transmission and focusing effect of laser beams.Measures: Select optical components with high precision, low loss, and good stability, such as lenses, mirrors, etc. These components should be able to maintain long-term stable p...

Aaron

02-21

72

0

0

Fault in the fiber optic section1. Fiber breakage: Fiber breakage is the most common situation in fiber laser machine failures, usually occurring in fibers that have been in use for a long time or have been excessively bent. The solution is to replace the fiber with a new one.2. Fiber optic pollution: When the surface of the fiber optic cable is co...

Smith

02-20

67

0

0

Hello! I’m new to the world of laser engraving and cutting, I have a Sculpfun S9 laser, I use Illustrator for my designs, I was making some keychains but when the shape is very complex the vector imports so badly, it gets deformed. I noticed that it does this if the vector had a lot of points, I tried to clean it up but now I see that some shapes a...

AL.TAL

02-19

91

1

0

Cuts/Layers.When I slect “fill” it does not fill the text or object in the work area? What am I missing?

AL.TAL

02-12

94

2

0

Hi everyone i just started to experiment with puzzles on my laser and have seen almost all vids on the topic on Youtube Lots of good information.BUT our “friend” called Kerf is an acurring issue. My experience now is that its two solutions to deal with the kerf. If you are going to engrave your design directly on the puzzle, you can just separate e...

Andre J

02-07

191

6

0

Do you like the piggy bank? Look at this one I made?

Jack Wilborn

2023-02-02

313

3

4

The fiber cutting control card is the control core of the fiber laser cutting machine. It is a motion control card that, by connecting to a PC and leveraging the powerful computing power of the PC, can quickly and accurately control the movement of the laser head to achieve high-precision and high-efficiency processing tasks.The use of fiber opti...

Payson

02-07

101

0

0

The fiber cutting control system is the control core of the fiber laser cutting machine. The operator transfers files to the fiber cutting control system and sets the corresponding parameters before starting processing. This is a modern intelligent CNC system. After completing the settings, the equipment can start processing independently without t...

Marshall

02-06

93

0

0

The reason for the sudden failure of laser cutting machine1. Laser malfunction. Laser is the core component of laser cutting machine. If the laser malfunctions, it will cause the laser cutting machine to malfunction.2. Optical path malfunction. The optical path is the channel through which the laser cutting machine transmits laser and performs cutt...

Vasili

01-20

95

0

1

1、 Reason for the problemIn the process of laser cutting, if the cutting line is too small or the laser power is too low, there will be a problem of non closure. In addition, if the cutting speed is too fast, this problem is also prone to occur. In addition, the material of laser cutting can also affect the closure of the cutting, and if the materi...

Christian

01-18

105

0

0

I have a image that i duplicated a few time to make a longer image. I am trying to make this image fit into a circle to make this image round.I can do text fine. But not images. If there is away, please let me know. Thanks.

RTP

01-13

120

8

0

Probably is a dumb question, but is there a simple way if stopping knives on the laser bed from falling inwards when u take honeycomb in and out. Had to replace my knives and holder. Have tried hot gluing tabs on ends where the knives seat but they fall off after a week ot so.

Ruddy

01-15

128

3

0

In the daily operation of laser equipment, the constant emission of light is a common and difficult problem to solve. It not only affects the quality of the product, but may also increase the maintenance cost of the equipment. Faced with the problem of continuous light emission, it is urgent to quickly and accurately diagnose the location of the fa...

Abel

01-10

161

3

3