The vulnerable parts of pulse laser cleaning machine mainly include the following aspects:1. Laser: This is the core component of the laser cleaning machine, which may experience energy decay or malfunction after long-term use and requires maintenance or replacement.2. Laser lens: The lens is used to adjust and focus the laser beam. After long-te...

Jamie

03-18

53

0

0

1、 LaserLaser is the core component of laser marking machine and an important component for generating laser. Normally, the service life is long, but regular cleaning and maintenance are required. If the laser shakes or becomes unstable during use, it needs to be replaced or repaired in a timely manner.2、 LensThe lenses of a laser marking machine ...

Vasili

03-18

54

0

0

Is there an easy way to set up an alignment guide layer that will appear when framing, but not be printed out?For example, I have wooden plaques that vary by just a little on height and width. The design I have in lightburn needs to be centered on these plaques. While I have physical guides on my machine, I need to move them a hair or two manually...

Andrej

03-06

78

3

0

Protective lenses are very important precision components in the optical path system of laser cutting machines, and their cleanliness has a significant impact on the processing performance and quality of the laser cutting machine. So, how to perform the correct replacement operation for protective lenses that have reached their service life?Tools...

Tory

03-17

55

0

0

Automatic plate rolling machineThe working principle of the fully automatic plate rolling machine is based on a three-point bending mechanics model.Through the relative motion of the upper and lower rollers and the side rollers,continuous force is applied to the metal sheet placed in between,causing the sheet to gradually undergo plastic deformati...

qshbcn

03-17

53

0

0

I have a Fox Alien Vasto CNC. The machine homes to the bottom left corner and in light burn it puts the laser in Y -390 and X -279. I have no problem burning or cutting projects because I align my projects with the laser off of the work area and it runs fine. But I have added a camera to help me align projects and when I try and align the camera it...

LWE

03-03

105

5

0

Laser cutting machine, as a high-precision processing equipment, plays an important role in industrial production. With the continuous advancement of technology, many users choose to upgrade their laser cutting machines to improve their processing efficiency and cutting quality. During the upgrade process, replacing the laser is one of the key step...

Smith

03-07

70

0

0

Preparation work for replacementBefore replacing the slider, it is necessary to prepare the corresponding tools and spare sliders to ensure timely completion of the replacement process. Meanwhile, in order to prevent accidents, the laser cutting machine needs to be powered off and put on standby for a period of time.Use tools to remove the origin...

Marshall

03-06

81

0

1

My svg looks good on the workspace and node edit mode looks good but preview has gaps in the path and actual output matches preview.I have redone the shapes and at first it looked good until I did the preview after moving it to Upper left corner.What should I check?I have gone back and now find that the loss occured when I put the output on laye...

Narrator

03-04

82

2

0

Hi all, I am running into a very frustrating issue with multiple layers and alignments.I have a 10W Vevor A7 and keep having the same issue. I am trying to create wheels for a project and have tried many different ways of creating the file.The file looks perfect on screen, but the results are far from that. It seems that I isn’t even cutting the c...

Andre J

02-28

93

4

0

Laser marking has certain requirements for the glossiness, thickness, and hardness of aluminum material surfaces.Requirements for laser marking on aluminum material surfaceDuring the laser marking process, factors such as glossiness, thickness, and hardness of the aluminum surface can all affect the marking results. Therefore, in order to achieve...

Miller

03-04

73

0

0

I have an Algolaser DIY 20W and everything works normally. Recently, I bought a Delta 22W, and when performing the material test, I have this misalignment problem.I have already tried tightening the belts and checking for vibrations, but nothing, absolutely nothing works.Does anyone have any ideas on how to solve this?

Ruddy

02-20

105

8

0

I have a six month old sculpfun S30 22W. I have always used a kerf of 0.13mm outward when making boxes. Lately I have noticed that the joints are no longer as tight as they were at the beginning and I have to set the kerf to 0.20mm outward. Is this normal? Is there some setting somewhere, or has the beam gone out of focus?

Jack Wilborn

02-28

177

3

0

I’m only just getting started with LB, and I doubt this is actually a LB issue, but the number of passes does not seem to work like I would have expected.I have some experience with lasers and optics going back years.My expectation was that if I can get a 1mm deep cut on pass #1, I should get a bit less than 1mm again on pass 2. However that does...

Ethan

02-28

183

3

0

Preparation work before replacing laser machine partsBefore replacing laser machine components, it is necessary to first turn off the machine power and confirm the model and parameters of the components to be replaced. At the same time, suitable tools such as electrician pliers, screwdrivers, focusing cards, etc. should be prepared.Replace laser ...

Clarence

03-03

73

0

0