New A5 M50 Pro can’t cut this plywood
Категории:
Лазер
288
1
0
2023-03-16
C
Abel
2023-03-17Make a square in LightBurn with the cut settings that you used. Then go to “Save gcode” in Laser window and save the code with a .txt extension and upload the file here. Will review to see if there’s something going on there.
0Ответить
Актуальные рекомендации
- 2024-11-18
- 2022-10-25
- 2022-10-15
- 2024-05-30