Is there a way to set the machine to only engrave over the parts that are being engraved instead of the machine spanning the whole piece I’m trying to cut an engrave.5 hours to engrave and cut these hexagons.10 min to cut and engrave one single one70 min if I did them each individuallywould be a cool feature if you could engrave each location ins...

Carey

2024-10-03

152

2

0

new 1.7.01 update leaves off fill on screenno longer shows difference between line and fill when viewing file you have to hit the preview to see the difference

Silvano

2024-10-05

138

2

0

I am trying to cut the hexagon out, take that piece out of the material it was cut from, bevel the edges, pop it back in the same spot it came from, and then engrave it so that it engraves the edge of the angle.The only way I can figure out how to do this. is if I delete the engraved part, cut the hexagon out, leave the material in place, take it ...

Cruise Wang

2024-10-03

117

2

0

Im new to laser cutting / engraving so please forgive my ignorance . I have been told to use a coolant for my laser cutter . Can any of u legends give some helpful advice on the coolant i should use ?

JOST

2024-10-05

136

1

0

I have this color logo from my Gasparilla Krewe, I have tried engraving this a couple times but it just not coming out to my liking, I have converted to black and white but still doesn’t looks good. Any suggestions?

LWE

2024-09-30

113

1

0

Hello,Normally when i whant the object in the home corner for starting to laseri do X=0 and Y=0When i do it now the object is crossing the edge of the machine workspaceen the object reverence looks like its lining from the object middlein the picture you see the XY are zero, but the allining from the black object is crossing the workspace

Tim Johnson

2024-09-30

90

1

0

Hi,Just bought a fiber laser and want to download a materials parameters library from The Laser Master Academy, which have been essentially useless in helping me. So I thought I would try here because of past successes.I am on a Mac with Sonoma 14.5, I am also using LightBurn 1.6.03. I initially downloaded the document and got the message that I ...

berainlb

2024-09-25

168

2

0

My Atezr l2 36w doesn’t move when asking it to home.The motors lock and it makes a sound as if it really wants to move but can’t.Anything I can change in the software? 

James

2024-09-26

168

4

0

I have a diode laser machine. If I engrave any surface that can reflect the laser. Is there a risk of the reflection burning the machine’s laser?

Noah

2024-09-29

157

1

0

HiI have recently been trying to create and print a curved 90 degree markings scale Tried quite a few methods, but most relate to circular array. I create a 90 degree scale with 1 deg graduations and then by working right to left (green box) I try to shorten and align groups of 4. i.e. long stoke 4 shorter ones and another long etc.When i do this t...

Ethan

2024-09-29

143

1

0

Boolean operations remove curvature in an object.The middle is similar to the result I would like except extra nodes were created top and bottom, this was done using the new scissor tool that is awesome by the way. The top is what I start off with but when I run weld all or boolean union of two the result is the bottom. It also does this with oth...

JOST

2024-09-27

129

2

0

Hello, I have recently had a problem with the autofocus of my Atezr L2 24w.When I use the “Autofocus” macro ([ESP500]), no particular problem on 3mm plywood but when it is necessary to do it on 6mm, the laser head continues to descend even if the micro switch is in contact with the board and it crushes it.As the problem is new (I had no problems 10...

Ruddy

2024-09-28

158

1

0

I had a Creality Falcon Pro connected to LB. I just got an XTool D1 pro 10w. I cannot figure out how to connect the new laser to LB. This is my screen:

Erdogan

2024-09-28

156

1

0

Hello. I turned my laser 90 degree counter clockwise yesterday on my work area now I can’t get my stored to match up and I can’t figure out how to swap my x/y axis is someone could please help. When I tried to invert them in the settings then my homing was off.

Cruise Wang

2024-09-27

130

1

0

I have a ThunderLaser Nova 24. The head goes to the home position after the job has completed. If I am engraving in the bottom of a tray with say one inch sidewalls what would be the best way to instruct the head to stay within the confines of the tray when engraving is complete? Trying to avoid a head crash.Thanks to all!  

Hiroko

2024-09-26

171

1

0