We have machine settings that work in ‘normal’ mode and another set of machine settings that work with a rotary. Is there a way to force a machine setting load via the command line or some other fashion so that the less educated user and start a batch file and get the correct setting for the configuration?

Carey

04-07

45

1

0

The laser welding speed directly affects the formation of the weld seam, welding strength, and the size of the heat affected zone. Appropriate speed can ensure good weld quality and welding strength, and too fast or too slow speed may lead to a decrease in welding quality.Laser welding, as an efficient and precise welding technology, has been wid...

Terrelle

04-07

45

0

2

pneumatic punching machine ‌manufacturerIntroduction of pneumatic punching machine‌:Pneumatic punching machine is a kind of punching equipment which uses compressed air as power source and controls the punch to move up and down through the pneumatic system.It is widely used in a variety of metal,non-metallic materials stamping processing,such as ...

DE19B85E

2024-12-31

147

6

1

I use a laser on my CNC router. I disassemble the spindle and mount the laser. In this case, a certain offset appears on the laser, which I measured and added to the device setting. Everything is fine when I go to the offset engraving works flawlessly. When I try framing, I have the exact offset that I added in the device setting instead of matchin...

Rajiv001

03-27

75

5

0

Hi, i have just purchased a used Bodor Laser 80w machine, model BCL 0605MUF but am not getting very far with the manufacturer. The unit was purchased from new in 2019 for £6000 but seems to have dropped out of existance being replaced by newer versions. The machine has been seen working and is in very good condition so would be great to find out a ...

F29A18B5

03-28

118

4

0

Reasons for Material Deformation in Laser Welding1. Thermal stressLaser welding is the process of melting and connecting materials at high temperatures, resulting in structural changes. During the cooling process of materials, internal stress is generated due to different cooling rates in different parts, resulting in material deformation.2. Residu...

Abel

03-31

62

2

1

I have an Atomstack A5 Pro equipped with a 5W laser. The problem I encountered is that when carving or cutting, the laser stops for a few milliseconds and the carving leaves burnt spots at the stop. Can you help me? What happened?

LWE

03-24

74

4

0

Having a super hard time getting this image engraved on black slate. I have tried everything. Tracing Image, Removing background, Inverting, Negative etc.and no matter what I do I can not get the face to engrave. It alway engraves the eyes and the lips but not the reverse.

Jack Wilborn

03-25

65

2

0

I want to make a rhombus (4 sides all equal in length) but not with 90 degree corners. I want a “star” shape with 2 120 degree angles and 60 degree angles.

AL.TAL

03-25

59

2

0

Hello friends, I have a problem with my Laser Atomstack S20Pro 20w - Blue laser. The laser does not engrave at power up to 0-20% and also does not engrave at speeds above 3000mm/m.-20000mm/m. For a better understanding, I created an engraving test. Birch plywood MDF 4mm is used. The task is completed normally. It does not report any errors. I am us...

Ethan

03-20

84

4

0

In the vast expanse of laser technology, single-mode lasers and multi-mode lasers are like two brilliant stars, each shining with its own unique radiance. As a manufacturer deeply involved in the field of laser technology, we are well aware of the differences and advantages between these two products. Today, let's unveil their mysterious veil and e...

Christian

03-26

64

0

0

The positive and negative effects of laser welding defocus amount affect the welding effect, with positive defocus increasing the depth of fusion and negative defocus decreasing the depth of fusion. Adjusting the defocus amount requires consideration of materials, thickness, and welding requirements to ensure welding quality.In the field of laser...

Liam

03-26

60

0

0

Hello everyoneI have always used the “user origin” setting (starting from the bottom left) but for some time, without me having changed anything, the laser, before starting the engraving, takes a step down and to the right of about a centimeter, forcing me to identify the starting point by eye. Has anyone figured out which setting I may have change...

Ruddy

03-18

89

5

0

Is there a way to make variable text with max length stay centered?I have tried with different allignments or grouping the variable text with the rectangle, but nothing helps.I have noticed that there is a button “Make permanent” with the variable text display.And if you hit that, the text is actually center-center.I will see if this works all the ...

JOST

03-24

65

2

0

Disadvantages of side axis powder feeding technology1. The selection of metal powder is limitedDue to the lack of protective gas, the laser melt pool can only rely on the self-protection of the molten slag during the melting of the overlay powder. Therefore, in current industrial production, self melting alloy powder is often used in the side axis ...

Henry

03-25

59

0

0