chanelink logo
CHANELINK
Türkçe

Ecken develops a new type of iron silicon powder for 3D printing of motors

144
2024-01-20 10:23:17
Çeviriyi gör

Through the SOMA project funded by the European Union, organic silicon material expert Aiken has collaborated with research partners and clients to develop a new specialized iron silicon powder that can more efficiently 3D print motor components.

 


Yesterday's electric motor was usually made by cutting and shaping parts from a metal plate. 3D printing can fundamentally improve efficiency and reduce material consumption. However, 3D printing of large motor parts has been proven to be difficult because the parts become too brittle and are prone to breakage.

In the SOMA project, Aiken collaborated with project partners VTT, Siemens, Stellantis, and Gemmate Technologies to develop new materials for 3D printing.

This powder is called soft magnetic, which means it is easy to magnetize and demagnetize, which is important in electric motors. It was produced in a small pilot nebulizer located at the Norwegian Catapult Future Materials Center in Christiansan. This powder has been used in 3D printing components to evaluate the quality and manufacturing of demonstration equipment. 3D printing and part identification have been conducted at VTT in Finland and Siemens in Germany.

"This is a project that has the potential to change the manufacturing of motor components. We have successfully created a new type of specialized powder based on silicon steel with good printing adaptability. 3D printed components exhibit enhanced flexibility and competitive magnetism," said Tomi Lindroos of VTT.

The last use case is to produce motors for electric scooters. The modeling conducted by Gemmate Technologies and VTT provides more innovative design opportunities for this use case.

"The powder developed in the SOMA project will now be pushed to the market by Ecken to evaluate the future commercial production of the product. The product is currently being provided through small batch testing," said Jan Ove Odden, Ecken project leader.

As the world shifts towards more sustainable modes of transportation, electrification has become a top priority for car manufacturers, governments, and consumers. Aiken is one of the world's leading suppliers of advanced silicon-based materials and will continue to provide silicon-based products for the mobile and transportation industries.

This three-year project started in January 2021 and received support from EIT Raw Materials. The project is funded by the European Union and has a total budget of slightly over 5.6 million euros.

Source: Laser Net

İlgili öneriler

  • HP100A-50KW-GD laser power detector for measuring extremely high power laser beams

    The HP100A-50KW-GD laser power detector is mainly designed for manufacturers of high-power lasers and laser systems, factories that use high-power lasers to cut thick metal parts, and military applications.The HP100A-50KW-GD adopts a gold reflector cone and a reduced back reflection geometry, which can capture 97% of incident light and process up to 50 kW of continuous laser power. The back reflec...

    2024-01-16
    Çeviriyi gör

  • In depth understanding of the formation of condensation rings in laser spot welding - machine learning and molecular dynamics simulation

    Researchers from the Pacific Northwest National Laboratory and Johns Hopkins University have reported that machine learning and molecular dynamics simulations can help to gain a deeper understanding of the formation of condensation rings in laser spot welding. The related paper titled 'Machine learning and molecular dynamics simulations aided insights into conditioned ring formation in laser spot ...

    2024-12-21
    Çeviriyi gör

  • High Power Laser Assists Scientists in Discovering a New Stage of High Density and Ultra High Temperature Ice

    As is well known, the outer planets of our solar system, Uranus and Neptune, are gas giants rich in water. The extreme pressure on these planets is 2 million times that of the Earth's atmosphere. Their interiors are also as hot as the surface of the sun. Under these conditions, water exhibits a strange high-density ice phase.Researchers have recently observed one of the stages, called Ice XIX, whi...

    2023-10-11
    Çeviriyi gör

  • Micro laser opens the door to chip size sensors

    The new device is a frequency comb - a special type of laser that can generate multiple wavelengths of light, each with a fixed frequency interval. On the spectrogram, it looks a bit like the teeth of a comb. In approximately a quarter century since their first development, these "cursor rulers" have completely transformed various high-precision measurements from timing to molecular detection. In ...

    2024-03-13
    Çeviriyi gör

  • 330 million US dollars! This laser ophthalmic treatment developer has been acquired

    Recently, according to a report submitted by BioLight to the Tel Aviv Stock Exchange, Swiss American pharmaceutical and medical device giant Alcon Pharmaceuticals is acquiring Israeli medical technology company Belkin Vision.It is reported that BioLight will sell its 4% stake in Belkin Vision, which may be worth up to $330 million based on the milestones established in the transaction.Belkin Visio...

    2024-05-06
    Çeviriyi gör