Tiếng Việt

Nature Photonics reports a new type of nonlinear optical crystal - all band phase matched crystal

99
2023-10-07 16:31:49
Xem bản dịch

Short wave ultraviolet all solid-state coherent light sources have the characteristics of strong photon energy, practicality and precision, and high spectral resolution. They have significant application value in laser precision processing, information communication, cutting-edge science, and aerospace fields.

The core component of obtaining all solid-state shortwave ultraviolet lasers is nonlinear optical crystals. In the process of nonlinear optics, if the energy of the fundamental frequency light is continuously converted to the doubling frequency light, it is necessary to maintain the second polarization harmonic excited by the fundamental frequency light and the doubling frequency light at the same position and time in the crystal. However, due to the intrinsic dispersion of the crystal, the refractive indices of the fundamental frequency light and the doubling frequency light are different, resulting in different group velocities of the two beams in the crystal, Unable to achieve sustained growth of frequency doubling light, this is a phase mismatch.

Therefore, achieving the application of band phase matching in crystals is generally considered the most difficult technical challenge, determining the final laser output power and efficiency. At present, there are various technical solutions to choose from, such as birefringence phase matching technology for crystal anisotropy, random quasi phase matching technology for spontaneous domain structures within crystals, and artificial microstructure quasi phase matching technology. Among them, the birefringence phase matching technology using crystal anisotropy is the most widely used and effective way to compensate for phase mismatch. This technology utilizes the birefringence characteristics of anisotropic crystals to make a certain polarization of fundamental frequency light incident in a specific direction of the crystal, or change the temperature of the crystal to achieve angle or temperature phase matching, even if the refractive index of fundamental frequency light and doubling frequency light propagating in a specific direction of the crystal is the same, This scheme has high conversion efficiency, but existing crystals all have phase matching wavelength loss, which can be characterized by the difference between the UV cutoff edge of the crystal and the shortest photo matching wavelength( λ Cutoff - λ PM).

Pan Shilie's research team from the Xinjiang Institute of Physical and Chemical Technology, Chinese Academy of Sciences, based on the previous research of cutting-edge progress in the field and the analysis of the current situation of birefringence phase matching of nonlinear optical crystals, put forward the assumption of an ideal state of nonlinear optical crystals in the invited review (Angel.Chem.Int.Ed.2020, 5920302-20317), that is, in nonlinear optical crystals based on birefringence phase matching, Can the ideal state of 'UV cut-off edge equal to the shortest matching wavelength' be achieved? If this assumption can be realized in the crystal, it will provide a new way and idea for the crystal to achieve birefringence phase matching throughout the entire transmission range.

Recently, the team has created a new type of nonlinear optical crystal, namely full band phase matching crystal. This type of crystal is based on the most widely used birefringence phase matching technology and can achieve phase matching for any wavelength within the transmission range of the crystal material. The physical mechanism of full band phase matched crystals was revealed. Starting from the microscopic expression of refractive index and optical conditions such as birefringence dispersion curve, refractive index dispersion curve, and phase matching, two independent evaluation parameters of full band phase matched crystals were given. This evaluation parameter was applied to some classic nonlinear optical crystal materials, and the feasibility and universality of using this parameter to evaluate the wavelength loss of crystal phase matching were discussed. Based on this, an example of nonlinear optical crystal (GFB) is obtained.

The author stated that the experiment investigated the direct frequency doubling output ability of crystals throughout the entire transmission range through multi-level frequency conversion schemes or optical parameter technology schemes. Based on phase matching devices, 193.2-266 nm UV/deep UV tunable laser output has been achieved, verifying the full band phase matching ability of the crystal, making it the first UV/deep UV frequency doubling crystal material to achieve full band birefringence phase matching, The crystal transmittance of this material at 193.2 nm is less than 0.02%, and it can still achieve frequency doubling laser output, verifying its full band phase matching characteristics. More importantly, the crystal has excellent linear and nonlinear optical properties, such as short ultraviolet cutoff edge (~193 nm), large effective frequency doubling coefficient (deff=1.42 pm/V), short phase matching wavelength (~194 nm), and high laser damage resistance threshold (>BBO @ 266/532 nm, 8 ns, 10 Hz), making it a promising nonlinear optical crystal material for 266 nm lasers.

The related research achievement "Achieving the full wavelength phase matching for effective nonlinear optical frequency conversion in C (NH2) 3BF4" was recently published in the journal Nature Photonics (2023, DOI: 10.1038/s41566-023-01228-7).

Figure: GFB crystal structure, microscopic performance analysis, and crystal photos

Source: Xinjiang Institute of Physical and Chemical Technology, Chinese Academy of Sciences

Đề xuất liên quan
  • China University of Science and Technology proposes composite cold field 3D printing technology for liquid crystal elastomers

    Recently, Associate Professor Li Mujun from the School of Engineering Sciences and the Institute of Humanoid Robotics at the University of Science and Technology of China, together with researchers such as Professor Zhang Shiwu, has made significant progress in the field of intelligent material 3D printing. The research team proposed composite cold field 3D printing technology and successfully pre...

    02-25
    Xem bản dịch
  • Latest breakthrough! 3500W free output blue semiconductor laser

    The 3500W free output blue semiconductor laser beam is output in a free space manner, with a rectangular spot directly acting on the material surface without the need for fiber optics or laser processing heads. This laser has a wavelength of 455 ± 10nm, with continuously adjustable power and a maximum output power of over 3500W. It is mainly used for non-ferrous metal cladding, quenching, etc., to...

    2024-09-03
    Xem bản dịch
  • Low noise! Switzerland develops a new type of laser

    According to foreign media reports, scientists from the Physics Research Institute and the Institute of Physics and the Center for Quantum Science and Engineering at the Swiss Federal Institute of Technology Lausanne (EPFL) in Lausanne, Switzerland have made a new progress in the field of excitation science, developing a smaller and quieter laser system than previous products.Small laser system (I...

    2024-07-03
    Xem bản dịch
  • Assisting Gas Mixing to Promote the Development of Fiber Laser Technology

    Just ten years ago, fiber laser cutting machines were considered experts in thin plates. The stores quickly realized that they had to invest in them to compete, at least by reducing their instrument materials. For high-quality sheet metal cutting, CO2 laser is still the way to go. Of course, fiber lasers can cut thicker blanks, but the quality is not very good, and their speed advantage almost dis...

    2024-01-11
    Xem bản dịch
  • Statsndata predicts that the light detection and ranging market will experience vigorous development globally in 2029

    The Light Detection and Ranging (LiDAR) market embodies the technology of remote sensing, surveying, and the use of laser pulses to measure distance and generate detailed three-dimensional models of objects, terrain, and environment.The LiDAR system emits a laser beam and measures the time required for the light to return to the surface, creating accurate and high-resolution digital representation...

    2023-08-31
    Xem bản dịch