Tiếng Việt

Progress in research on neodymium doped strontium aluminate lanthanum magnesium laser crystals by Shanghai Optics and Machinery Institute

135
2024-04-17 16:11:47
Xem bản dịch

Recently, the Advanced Laser and Optoelectronic Functional Materials Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, has made progress in the research of Nd: ASL (Sr0.7Nd0.05La0.25Mg0.3Al22.7O19) laser crystals, and the related achievements were published in Infrared Physics&Technology under the title of "Tunable laser operations on Nd doped continuum and lanthanum aluminum crystals".

Neodymium (Nd3+) ion is one of the common activating ions, and its absorption peak matches the emission wavelength of commercial laser diodes (LDs), with high absorption efficiency at 0.9, 1.05, and 1.35 μ There are emission peaks at position m, and laser emission has been achieved in various matrix materials. Nd: ASL is a typical disordered crystal, belonging to the hexagonal crystal system. The high disorder leads to its spectral broadening, which is beneficial for generating lasers of different wavelengths.

In order to investigate its tuning characteristics, the research team grew Nd: ASL crystals with a doping concentration of 5%, and measured their fluorescence lifetime to be approximately 371.8 μ S. At 1.05 μ Near m, its fluorescence spectrum has four strong and continuous emission spectra. A birefringent filter was inserted into the V-shaped resonant cavity for tunable laser experiments. By using output mirrors with transmittance of 5%, 7%, and 10%, three independent wavelengths (1050, 1062, and 1074 nm) of laser output were obtained. The wavelength range is 1049.59-1054.43 nm and 1059.71-1078.18 nm for tuning, with a tuning width greater than 20 nm, which is consistent with the spectrum. The phenomenon of multi wavelength laser output was also observed in the experiment. The results indicate that Nd: ASL crystals are a gain medium suitable for tunable lasers. Compared with single wavelength laser media, controlling and changing the wavelength is much more convenient and suitable for complex application scenarios with higher accuracy or more wavelengths.

This work has received support from projects such as the National Natural Science Foundation of China.

Figure 1. Fluorescence spectrum of Nd: ASL crystal

Figure 2. Laser output with three wavelengths at different output mirror transmittance

Figure 3. Output power at different wavelengths under the same absorption pump power

Source: Shanghai Institute of Optics and Precision Machinery

Đề xuất liên quan
  • Jena Helmholtz Institute Using Air Deflection Laser Beam

    A novel method is used to deflect the laser beam using only air. The interdisciplinary research team reported in the journal Nature Photonics that invisible gratings made solely of air not only do not suffer damage from lasers, but also retain the original quality of the beam. The researchers have applied for a patent for their method.Technology and PrinciplesThis innovative technology utilizes so...

    2023-10-07
    Xem bản dịch
  • Duke University: Laser imaging holds promise for early detection of risky artworks

    Compared to Impressionist paintings taken 50 years ago, upon closer inspection of Impressionist paintings in museums, you may notice some strange things: some are losing their bright yellow hue.Taking the dramatic sunset in Edward Munch's masterpiece "The Scream" as an example. The once bright orange yellow parts of the sky have faded to off white.Similarly, in his painting "The Joy of Life", Henr...

    2024-05-14
    Xem bản dịch
  • A German 3D printing company applies for bankruptcy

    On February 5th, it was reported that Q BIG 3D GmbH filed for bankruptcy on January 31, 2025. The Ludwigsburg District Court has ordered temporary bankruptcy administration and appointed Mr. Ilkin Bananyarli of PLUTA Rechtsanwarts GmbH as the temporary bankruptcy administrator.The company was founded in 2019 and focuses on large format particle 3D printing systems, providing additive manufacturing...

    02-06
    Xem bản dịch
  • Super-resolution fluorescence microscopy utilizes fluorescent probes and specific excitation and emission programs

    Super-resolution fluorescence microscopy surpasses the diffraction limit of what used to be a barrier by using fluorescent probes and specific excitation and emission programs. Most SR technologies heavily rely on image computation and processing to retrieve SR information. However, factors such as fluorescence group photophysics, chemical environment of the sample, and optical settings may cause ...

    2024-01-23
    Xem bản dịch
  • LiDAR solutions provider Cepton acquired by KOITO

    On July 29, 2024, Cepton, a provider of high-performance LiDAR solutions, announced the signing of the final agreement for its acquisition, making it the acquiring company's subsidiary in the United States.Image source: CeptonAccording to the agreement, the acquirer is the internationally renowned automotive lighting giant KOITO, which was established in 1915 and has a history of over a hundred ye...

    2024-08-01
    Xem bản dịch