HelloI just upgraded my focus on the laser.1. [image for instructions] g-code is that necessary ?2. 400 x 400 that’s for default but 400 x 390 (I’m guessing) because I have extension (also in the image)? gcode also ?3. Waste board grid ? How to measure ?

Tory

2023-04-12

313

1

0

I have been using a USB video camera for months which is recognized as SMI.I think it’s an ov 5647 that has always worked perfectly in color.for a few weeks now I’ve only seen the preview in black and white despite the lightburn settings being in color.using the windows tool for the webcam I see it working perfectly in color.otherwise i...

David

2023-04-12

301

1

0

On April 11, Carbon Robotics, a Seattle-based laser weeding robot company, announced a $30 million Series C funding round.The round was led by Sozo Ventures with existing investors Anthos Capital, Fuse Venture Capital, Ignition Partners, Liquid 2 and Voyager Capital, The funds will be used to expand the North American sales territory, optimize and...

Keegan

2023-04-12

231

1

0

SLTL Group, a leading manufacturer of industrial laser solutions, has announced the launch of an upgraded vector fiber laser cutting system, which is now Industry 4.0 capable. The new system has advanced features designed to improve the efficiency, productivity and connectivity of metal cutting applications.The Vector fiber laser cutting system i...

Marshall

2023-04-12

288

1

0

A novel ultrafast tunable laser based on low-loss lithium niobate integrated photonics can find applications in technologies such as continuous-wave optical detection and ranging (LiDAR) systems. The device, built by researchers at the Ecole Polytechnique Federale de Lausanne (EPFL) in Switzerland and IBM Research Europe in Zurich, has a high frequ...

Aaron

2023-04-12

204

1

0

I use Lightburn with 3 lasers.2 Lasers have the home origin point top right, the third laser has the home point top left.Is it possible to change the home origin automatically? Now I have to mirror the pictures when i using all 3 lasers

Jamie

2023-04-12

328

1

0

I created a Christmas ornament with the name of nephew on it and tested to see how it would come out. It came out fine, but when I copied the whole image and pasted it so that I could cut multiple cutouts at the same time, the text got all messed up. This is my first time using the forum and have some pictures to upload so will see how that goes. A...

Henry

2023-04-12

400

1

0

I have a PWM laser I’m trying to controll it using lightburn, the only solution that i found is to controll it like a servo using pin D11 on ramps 1.4 please to wich pin should i plug my laser to on ramps 1.4 in order to be controlled by the COMMAND M106.Thanks.

Robert Evans

2023-04-12

408

1

0

Trying to engrave pine wooden frame and engrave photo but settings not correct and keeps burning image when trying to engrave image. My image is in inches 8x8 and I tried setting the power at 60% and speed at 10 and it still keeps burning the image? need help and advise please. Should my image be in mm or what am I doing wrong to get the laser to b...

Clarence

2023-04-11

358

1

0

I have been trying to cut Foam Board I purchased at Dollar Tree for a foam airplane. I was surprised that my Atomstack A20 (supposed to have the 4 diode power rating equivalent to cut through 15mm of wood) doesn’t make a scratch on the foam even at 100% power. It will do a number on the paper and so I know it is working, but the white foam un...

Terrelle

2023-04-11

241

1

0

xtool D1 manual asks to download this file before configuring the LB software. Cannot run that file with LB. I receive a message “to find a version for your laptop, check with software publisher.” Laptop has version 1.3.01 loaded. I believe it as a GRBL controller.

Payson

2023-04-11

288

1

0

I am having a nightmare. I had a K40 and loved it. I had to align it once or twice and it was easy, however, I bought a bigger laser.It’s 600 x 400 so not enormous but gives me lots more room than the K40 I cannot align the laser.If I explain what I have been doing it might explain so someone can help me solve this issue as I want to pull my...

Vasili

2023-04-11

401

1

0

Once I make a lightburn file, my laser won’t load it. I hit send and it shows the loading of the file sending but the laser won’t accept it, it seems. Now if I open a new file and copy paste the same cut or engraving on the new file before saving it, hit send the laser accepts it just fine. I just updated to the newest LB version hoping...

Gilbert

2023-04-11

323

1

0

As of April 10, 2023, NUBURU is a company specializing in the production of high power blue lasers for industrial use. Their website emphasizes that their blue lasers are used in laser welding and additive manufacturing of metals such as copper, gold and aluminum. Blue light interacts effectively with reflective metals such as aluminum and copper, ...

Patrick

2023-04-11

247

1

0

Melbourne-based distributor Agrippa has acquired the Australian distribution rights for the new Awol Vision, a premium short-focus projector designed for the custom installation market.The latest iteration of the 4K Awol Vision Vanish projector, unveiled at CES 2023, is called "The Vanish" and consists of three separate pieces, Includes the LVV-3...

jessie

2023-04-11

396

1

0