A research team, including scientists from the University of Rostock and the Helmholtz Center Dresden-Rosendorf (HZDR), conducted laboratory experiments at Lawrence Livermore National Laboratory (LLNL) to provide new insights into the complex process of pressure-driven ionization in giants of planets and stars. Their research, published May 24 in t...
2023-06-1436900It's a promising technology that we're hearing more and more about. Lidar (for light detection and ranging) is a type of laser beam scanning used specifically to measure distance, shape and volume. It opens up many prospects, especially in the field of piloting autonomous vehicles. French startup Outsight also positioned itself in this niche before...
2023-06-1323210Salgenx, a forward-thinking division of Infinity Turbine LLC, is poised to disrupt the battery industry with its groundbreaking multi-dimensional processing tool development. Leveraging the capabilities of the improved standard laser printer, Salgenx envisions a future of continuous manufacturing using a roll-to-roll (R2R) laser-induced (LI) proces...
2023-06-1325110I have two copies of lightburn 1.4.00 on two computer. the older laptop this window has 3 buttons “set origin, clear origin and set finish position”. The copy of lightburn 1.4.00on my new computer does NOT have these buttons.
2023-06-1337820I haven’t used the 2s for a while, and in the interim the software has moved onmy last available upgrade is 1.2.04, but prior actual work had been done on 1.2.01, which was working finei updated to 1.2.04 because trying to use a file created on that version on my desktop machine threw a message suggesting it may not work properly on the old...
2023-06-1322910I have a new machine a Atomstack S10 PRO, Laser is 10-11 Watts max and my problem is that when using Lightburn I have to usemultiple passes to burn through 1mm veneer yet without changing a thing I switch to Laser GRBL and at 100% it will burn through the veneer, I do not understand what if any I am doing wtong? Why is it that both programs are set...
2023-06-1336510I finally got around to getting my camera set up on my atomstack x20 with y axis extention and the setup and calibration seemed to go smoothly but when I tried to calibrate the alignment it tries to center the test file and puts the overlay centered in the workspace. The Y axis shift won’t move it down far enough to be aligned. I can change t...
2023-06-1319410Germany-based high performance laser manufacturer HuBNER Photonics has announced the launch of the higher power Cobolt JiveTM 561 nm laser model.With a continuous wave output power of up to 1W, the Cobolt JiveTM 561 nm laser is ideal for demanding applications in fluorescence microscopy, especially super-resolution microscopy (such as DNA-PAINT),...
2023-06-1322010Sivers Photonics, a leading supplier of optical fiber communications and III-V semiconductor photonics devices in the UK, said it is currently conducting a comprehensive evaluation to improve its operational capabilities to meet batch production targets of more than 1,000 wafers per week.Start the optoelectronic foundry expansion projectSi...
2023-06-1320210Trumpf has announced that it has developed an artificial intelligence (AI) application for lasers that can make manufacturing more efficient. For example, electric vehicle manufacturers can use it to produce more electric motors in less time and reduce rework and scrap rates."In the future, we want to use AI to take the entire system of lasers, o...
2023-06-1228410Laser cladding, as a surface strengthening technology with high precision forming and low damage control, can endow parts with higher surface properties. As a low-cost coating system, iron-based coating has been widely used in the field of surface strengthening of various mechanical parts. With the pursuit of high performance and long life of parts...
2023-06-1231810I have a problem which is more an annoyance than anything else but wonder if there is a solution.Here I have the visual grid set to the default of 10 and the work area zoomed so the grid legend is clear to read.However if I were to change the zoom, e.g. to zoom into an object or, as in this case, simply click the ‘zoom to frame’ selecti...
2023-06-1219510I own a Thunder Nova 63 Co2 130w laser. A consistent issue I am having is inconsistent results. I place a 1/4" piece of acrylic (material is flat and anchored using pins inserted into honeycomb in the bed, send the file via light burn, and I get a perfect cut. Speed/Power(%) 14/97. At this speed and power the laser usually burns clean through the a...
2023-06-1221110I have an XTOOL laser and it smokes a lot when i am burning a phrase on a cutting board. it smokes my whole house out, it even set off the smoke detectors off a few times. I have it in one of the rooms in my house because it is hooked to my desktop. does anyone have any ideas for keeping the smoke down?
2023-06-1229810I tend to model on the desktop then save files to my server and open in the shop on the laptop.My laptop/control cpu settings were read from my machine. They appear to be accurate as far as estimated time in the preview and the actual time.But when modeling on the desktop I can see it is nowhere near the actual time. (example: Desktop 1:23min &rarr...
2023-06-1236610
- 暂无数据
简体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski