Cooling capacity refers to the cooling capacity generated by the normal chiller. It is generally expressed in KW and also used as CAL.Refrigerant is the fluid in the refrigerant circulation of water chiller, R22, R404 and so on. Power consumption and power supply are indicated on the nameplate.Water cooled chiller is the use of water cooli...
2023-03-3026600Scientists at King Abdullah University of Science and Technology have demonstrated a simple way to alter compact semiconductor lasers to make them more suitable for lighting and holography. The study appears in a recent issue of Optica.Semiconductor technology allows all components of the laser to be packaged into a micron-scale device, which incl...
2023-03-3013600At present, laser has been widely used in industrial production, especially for welding, cutting, punching, marking and surface treatment of metals. Laser welding technology is gradually replacing the traditional welding technology, which mainly benefit from the laser welding in production has the characteristics of fast welding speed, easy to be g...
2023-03-3020000My Lightburn does not remember my computer. I just bought a new computer and set it up as usual and used it every time I close the program and reopen, I have to set it up again. I followed instructions and imported set info as instructed but it doesn’t keep the set up. My older computer had no problems. I even uninstalled and reinstalled and ...
2023-03-2914710I am new at laser engraving and I’ve been doing some test engraving with text. No matter what size I make the text, the line thickness is the same. Is there a way to adjust this in Lightburn?
2023-03-2911310Is there any way that we can specify that one of the layers (in my case it is the Red 02 - Boundary Cut layer) always be last in the cut order, regardless of how the ordering is set on import, last used settings etc?I’ve been bitten a few times where I hadn’t noticed another layer is below this, and ended up with inner cuts or engraves...
2023-03-2924710Hi there,I am using sculpfun s30 pro 20w diode laser. I use it around %80-90 power. However when i am cutting 8mm or 10mm plywood, it starts to burn small shapes such as 10x small circle has diameter around 10mm. It needs to do around 20-30 pass for a cut that thick poplar or birch plywood. However to be able to cut it without burning the wood, i a...
2023-03-2924710Help the only way i can get my text the correct way up is to mirror image it on the text screen what am i doing wrong complete Newbie sorry i have an Atomstack A50 pro have i set my Axis wrong ? also what version of Lighburn licence would i need to purchase for my Atomstack i basically just do House Name Signs thanks
2023-03-2913010I’ve successfully installed my corfiles. But when I do, it makes my work space .394x.394in with 2 different lens. & I can not change it manually.
2023-03-2925910Two cylinders hold up one frame on each side. If one of the cylinders is slow the shelf will be forced on one side. I've been thinking about it for a long time and it seems like it's impossible to synchronize the two cylinders, even if the pressure is the same, the piston will not be as tight as it should be over a long period of time, causing it t...
2023-03-2930410Introduction: There are many kinds of transmission modes, and there are more widely used transmission modes such as mechanical transmission, electrical transmission, hydraulic transmission and pneumatic transmission, but these transmission modes are not perfect. In this paper, the advantages and disadvantages of hydraulic transmission will be intro...
2023-03-2920800Inspired by the bionic properties of butterfly wings, scientists have recreated a complex structure previously found only in nature, which promises to open up new ways of manipulating and controlling light to create a new generation of photonic crystals.This structure can be found in the wing scales of certain butterflies, and it can functi...
2023-03-2911600Recently, a team from DELFT University of Technology (DELFT) in the Netherlands has developed an on-chip technology to measure distances in materials, such as underwater or medical imaging, with high precision. The technology, which relies on sound vibrations and is suitable for high-precision position measurements of opaque materials, could lead t...
2023-03-2913600Another camera problem. I have two K40s and one laptop with Lightburn, One K40 has the C3d board, the other has an OMTECH controller upgrade board, Both have a camera, one is a 160 degree fisheye, the other is a 170 degree fisheye. The device setup was completed for the omtech version with home and origin at upper left, camera location and calibrat...
2023-03-2829511I replaced my computer today, windows 10 to windows 11, I installed the newest Lightburn software. connected to my controller no problems.time to calibrate the camera.When I click on lens calibration wizard, the camera view is blank.I have 2 cameras it happens with both cameras.I have tried a ton of things.1. reboot camera/ reinstall windows dri...
2023-03-2814410
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski