How to prevent the compressor failure of industrial chiller?

Industrial chillers are widely used in our industrial production. Industrial chiller even if the configuration is advanced, but if used improperly, the consequences are immeasurable. In the process of use, if the user does not maintain and maintain the compressor of the chiller, it will cause different degrees of damage, affecting the work efficiency of the entire chiller. Next, I will share with you how to prevent the compressor failure of the chiller in advance.

1) Pay attention to the sound of the chiller when the chiller is working. When we find that the sound of the chiller operation is abnormal, we must pay special attention to it, if the abnormal sound is issued by the compressor, and the sound is gradually increasing, we should immediately stop the operation of the chiller and check it. Because even if the problem of the compressor is small, it will cause serious failure in the future.

2) During the operation of the chiller, the value change of the pressure gauge is often observed. We should prevent the pressure problem from reducing the work efficiency of the chiller compressor, resulting in an increase in power and energy consumption, especially vigilant about the abnormal fluctuation of the chiller pressure gauge, and immediately contact the chiller manufacturer for repair and maintenance when it cannot be solved.

3) Use the chiller to measure the operating temperature of the chiller in real time. When the temperature of the chiller is too high, we should pay attention to the fact that it may be a precursor to the failure of the chiller, at this time, we must determine the cause of the high operating temperature of the chiller by measuring the current, voltage and other data, and eliminate the fault in time.

4) When using the chiller, pay attention to regularly check the accuracy of the chiller parts. When we use the chiller, we will regularly repair and maintain the chiller, so we also need to check whether the repaired parts can reach the original accuracy and whether they are repaired according to the strict repair scale. Once the parts of the industrial chiller wear, resulting in unqualified accuracy, the subsequent will produce a series of product failure problems, affecting the normal operation of the chiller, so we have to pass strict technical treatment, so that it meets the qualified operating standards.

The above is some chiller knowledge, I hope to help you.

Source: Coolingstyle