The correct wiring method of safety wire of laser chiller

Laser chillers are often used to cool ultraviolet lasers of cutting machines, marking machines, engraving machines and other equipment.

In the installation and use of laser chiller, the connection of the safety line is very important. If the wiring is not correct, it may lead to electric shock and other safety accidents. Therefore, we need to understand the correct wiring method of the safety wire.

Before wiring, we need to disconnect the power supply to prevent electric shock; Then connect the plug and power socket of the laser chiller, and connect the safety wire plug with the safety wire socket of the laser chiller. In the connection process of the safety line, we should pay attention to:

1. The plug and socket of the safety wire should be completely fit, and there should be no signs of loosening. If the plug and socket cannot be fit, please replace the plug or socket immediately to make it fully fit;

2. The safety line grounding must be reliable, to ensure that the grounding is close, good contact, to avoid causing the risk of leakage;

3. Ensure that the safety line is intact and there is no sign of damage and breakage. If there is, it must be replaced in time to avoid safety accidents causing the machine to fail to operate.

In short, we must correctly connect the safety line of the laser chiller. If we connect the wrong wire, it may cause an accident such as fire or electric shock. Therefore, we should take it seriously to ensure the safe operation of the laser chiller. During the wiring process, we must also ensure our personal safety, and when we encounter problems that cannot be handled, we must contact the chiller manufacturer in time and communicate with professional maintenance personnel.

Source: coolingstyle