English

To choose a laser chiller, you must first understand these five points!

Categories:
Hydrocooling
262
0
See translation
2023-03-07

Working principle of laser water chiller
A certain amount of water is injected into the case, and then the water is cooled by the cooling system of the water chiller. The cooling water is circulated to the laser equipment through the water pump, and the cooling purpose is achieved by reciprocating circulation.

 

Advantages of laser chiller
1. The water circuit of the laser chiller is made of stainless steel (water tank, evaporator, water pump, pipe fittings, etc.);
2. The display screen adopts full intelligent LCD screen or digital display controller. Simple and intuitive operation;
3. Configure flow alarm, water pressure alarm and temperature alarm system to make the equipment operate more safely;
4. Double temperature and double control system, single temperature control system and high temperature control precision can be selected according to the equipment.

 

Selection of laser water chiller
1. Refrigeration capacity
According to the photoelectric conversion efficiency of the laser equipment, calculate the heat generated, and then select the appropriate industrial water chiller.
2. Temperature control accuracy
For semiconductor lasers, the temperature control accuracy must be ± 0.1 ℃, which requires the compressor to predict the temperature change rule and adapt to the load change. Quanguan can provide different temperature control systems according to different equipment requirements.
3. Water flow and booster pump head
The cooling capacity provided by the compressor, while the water flow represents the capacity of the chiller to take away heat, and the water flow is controlled by the booster pump.
4. Thermal efficiency and water volume
With the same cooling capacity and water volume of the compressor, the operation control mode with PID feedback function will greatly improve the cooling capacity of the whole system.
5. Water quality requirements
If the purified water is not replaced for a long time, bacteria and impurities will grow and deposit on the laser, which will affect the life and use effect of the laser.

 

Source: Quanguan Intelligent Equipment

C
    • No comments
    Collect
    Report