Common faults of laser chillers: blockage of water channels

Laser chillers are ubiquitous in industrial applications, used for cooling and cooling lasers.
Below is a brief analysis of the common problems of water blockage in chillers.

1. First, it is necessary to check the specific location of the blockage in the water circuit of the laser chiller, whether it is a blockage in the internal pipeline of the laser chiller or a blockage in the external water circulation of the chiller.

2. If the internal pipeline of the laser chiller is blocked, you can first rinse the pipeline with clean water and use professional cleaning tools such as air guns to clear the water circulation pipeline. After dredging the waterway, add clean distilled or purified water to reduce the impact of water quality on the pipeline. During daily use, the laser chiller should frequently replace the circulating cooling water, and the approximate time for regular replacement of the circulating water should be determined based on the usage environment.

a) If you are using in a good environment, such as an independent space, laboratory, and surrounding environment without impurities or pollution, you can generally replace the circulating water every six months;

b) If you are using it in harsh environments, such as severe pollution or poor environmental conditions, it is recommended that you replace the water once a month for the special area chiller. At the same time, it is recommended that you add anti scaling agents to reduce the generation of scale on water quality and cause water blockage.

c) If your chiller is operated in a normal industrial environment, it usually only takes about two to three months to replace.

3. If the external circulation pipeline of the laser chiller is blocked or blocked, the user can check the external water circulation pipeline of the chiller to ensure the smoothness of the external circulation pipeline. In addition to regularly replacing the circulating water, it is also important to regularly clean the dust screen and condenser to ensure that the chiller can operate better and effectively, improve work efficiency and service life. The above is a brief summary of the water blockage in the laser chiller, hoping to be helpful to you.