How to connect the interface of laser chiller and laser

The laser chiller is an important part of the laser, which keeps the temperature of the laser in a suitable range by cooling it to ensure the stability and life of the laser. So, how to connect the interface of the laser chiller?

First of all, it is necessary to clarify the working temperature and flow requirements of the laser, ensure that the laser cooling water function meets its requirements, and ensure that the external output pipe interface of the laser chiller matches the interface of the laser, and then ensure that the water system of the chiller is not started, and place it in the correct position.

Secondly, the water outlet pipe of the laser chiller and the water inlet pipe of the laser are connected, different lasers may have different installation methods, we need to install according to the instructions of the laser, at the same time, we should also pay attention to the direction and position of the joint to ensure the normal use of the laser.

Finally, the inlet pipe of the laser chiller is connected to the outlet of the circulating pump, and the outlet pipe of the laser is connected to the inlet of the chiller, so that it forms a circulating cooling waterway. The length and pressure of the pipeline need to be adjusted according to the actual situation to ensure the flow of water and cooling effect. At the same time, we should also pay attention to the power and voltage of the pump to ensure the normal operation of the pump. After the connection is complete, turn on the power supply of the chiller and laser for test, and start to use after the parameters are stable.

It should be noted that in the process of connection, it is necessary to ensure the firmness and tightness of the connection interface to ensure that the upper and lower pipelines will not leak and backflow; In the process of use, regular cleaning and inspection, cleaning pipes and interfaces, to ensure that there are no impurities and scale, to prevent blockage and rust, to avoid affecting normal work; Check whether the parts of the machine are worn or damaged, and if so, replace them in time to ensure the normal operation of the machine.

In short, when connecting the chiller and the laser, it is necessary to fully consider the matching degree and connection mode between the two, but also to regularly repair and maintain the equipment, in the process of connection and use, when you encounter situations that can not be handled, you should contact the chiller manufacturer in time, and ask them to send professionals to assist.

Source: coolingstyle