The solution to the problem of unclear marking by laser marking machine

Sometimes when using a laser marking machine to print something, it may not be obvious. What is the reason for this? In fact, there are many reasons why the laser marking machine may not produce obvious results during use, such as the power of the laser, the focal length, and the material used. We can first check the focal length of the laser marking machine. First, test if the focal length is within the normal range. Generally, the focus is adjusted in advance by the laser marking machine manufacturer. Just adjust the focal length to the appropriate range.

Power adjustment of laser marking machine. Let's first check if the power of our marking machine is too low. You can adjust the low power to high power. Or it's still not possible to check if the laser marking machine has reached its service life and the power has decreased.

Adjust our marking speed. The marking speed can be adjusted to be lower. Because the slower the marking speed, the clearer the scanning and marking process will be. That is to say, the larger the heating range of the laser. It is not obvious to adjust the parameters of the laser marking machine by combining the marking speed and marking power. This basically solves the problem of the laser marking machine not being able to print things clearly enough.

Another issue is that the materials used are not suitable for current laser marking machines, such as the fiber laser marking machine we use to mark ceramic materials. At this point, you will find it difficult to hit. So we need to replace the corresponding laser marking machine. Fiber laser marking machines mainly use metal materials and some non-metallic materials. Carbon dioxide laser marking machine is mainly suitable for non-metallic materials. So we need to first understand this question, whether this material is suitable for laser marking machine processing.

Source: Xingbo Laser