chanelink logo
CHANELINK
English

What is a Single Swinging Hand Welding Laser Control System

Categories:
Control
Tags:
23
1
See translation
06-14

The handheld laser welding machine needs to be equipped with a control system to control the equipment. The current mainstream solution for the control system is an embedded controller. Due to the difference between a single pendulum mirror and a double pendulum mirror in the mechanical vibration system of the handheld laser welding machine controlling the laser beam, the control system is also divided into corresponding single pendulum handheld laser welding control systems and double pendulum handheld welding laser control systems.

laser welding

The single pendulum handheld laser welding system can control the laser beam to accurately locate the welding point by adjusting the angle and position of the galvanometer, achieving high-precision welding. Moreover, the price is more favorable compared to the double pendulum handheld laser welding system, making it more suitable for less complex welding tasks.

The main functions of the single pendulum handheld laser welding control system include the following:
Laser control: Laser control is one of the main functions of the control system. The single pendulum handheld laser welding system can adjust parameters such as laser power, beam size, and tilt angle to control the laser and complete different types of welding processing tasks.

Parameter settings: The single pendulum handheld laser welding system is very intelligent. By setting corresponding parameters on the system, operators can quickly adjust the handheld laser welding equipment to the appropriate processing state, such as setting the power size for different metals with one click, or quickly adjusting the beam size for different welds, and so on.

Information display: The display board of the handheld laser welding control system has a friendly and easy to understand operating interface, and the vast majority of equipment and processing information will be displayed. Operators can judge the current welding situation, processing time, operating status, etc. by observing the displayed information.

Safety alarm: Handheld laser welding systems usually have monitoring and diagnostic functions, which can monitor laser emission, optical path, cooling system, etc. in real time, and diagnose and alarm in case of faults or abnormal situations. If necessary, laser emission may be forcibly cut off.

C

    • Smith

      06-17
      A regular motor is a simple construction motor that is typically driven by an AC or DC power source and can achieve certain speed and torque adjustments.
A deceleration motor is a type of motor that is equipped with a deceleration device on top of a regular motor. By using the deceleration device, the output speed is reduced while the output torque is increased. It is commonly used in situations that require high torque and low speed.
Stepper motor is a special type of motor commonly used in situations where position and speed control is required, which can achieve very precise positioning and motion control.
Servo motors are used to further improve the accuracy and response speed of position and speed control on the basis of stepper motors, and are commonly used in situations that require high-precision and high-speed control, such as robots, automation equipment, etc.
        See translation
        Reply
      Relevant recommendations
      Collect
      Report