Work upload method

Click the [Upload] button on this page (you can see it after logging in), or enter the "Design" section and click the [Upload] button to upload.

Reward Description

1. Reward Amount

During the activity, if you upload 5 works cumulatively, you will be rewarded with 8 USD;

If you upload 10 or more works cumulatively, you will be rewarded with an additional 12 USD, for a total of 20 USD.

Example: Upload 10 or more qualified works → Reward 8+12=20 USD (capped);

(Note: All uploaded works must be reviewed and approved before they are considered as "qualified works".)

2. Reward Distribution Time

After completing the work upload task, the platform will immediately send the bonus to your Chanelink asset account.

3. Withdrawal Method

You can withdraw through the "Asset Center" to your PayPal or Alipay account

Work Review Standard

● Originality: Works must be original, and plagiarism and misappropriation of other people's works are prohibited.

● Compliance: Healthy content, no illegal information, and a single work can only be uploaded once.

● Quality requirements: high clarity, standardized format, and complete design.

● Review cycle: Your uploaded work will be reviewed within 1 business day.

Important statement

● Participants must be 18 years old or above.

● Multiple accounts, plug-ins, false transactions and other violations are prohibited. Violators will be disqualified and the rewards will be recovered, or even the account will be banned;

● If the user is unable to obtain the reward due to his own reasons, it will be deemed that the user voluntarily gave up the reward, and the platform will not provide compensation;

● The platform reserves the right to adjust the activity rules within legal limits, and the adjustments will be announced on the activity rules page. Continuing to participate in the activity is deemed to accept the latest rules.

Note: The final right of interpretation of the activity belongs to the platform. If you have any questions, please contact customer service: service@chanelink.com

magic

The camera light does not work

The starting point of the cutting pattern is not at the locating point

The graphics and actual graphics in the software are reversed from left to right or up to down

USB is not connected (with COM port)

Laser does not emit light