How to solve the problem of abnormal water flow in laser

1、 Waterway inspection
The main reason for abnormal water flow in the laser is due to water blockage or pump failure. Therefore, we first need to check whether the water path of the laser is blocked and whether it is well connected. If there is a blockage in the waterway, it is necessary to clean or replace the local water pipe and exhaust it. If there is a water pump malfunction, the water pump needs to be replaced.

2、 Water temperature inspection
The working efficiency of a laser is closely related to water temperature, and excessively low or high water temperature can cause abnormal water flow in the laser. Therefore, we need to check the water temperature of the laser to ensure that it is within the normal range. If the water temperature is too high, it needs to be cooled down in a timely manner, which can be achieved by adding or replacing the water cooler. If the water temperature is too low, it is necessary to heat or replace the heater.

3、 Water quality inspection
The operation of the laser requires that the water quality is not too poor, otherwise it will cause water blockage and abnormal water flow of the laser. Therefore, we need to regularly check the water quality of the laser. If any problems are found with the water quality, we need to clean or replace the water filter in a timely manner.

4、 Laser cleaning
Long term use of the laser can lead to the accumulation of dust and dirt, which can affect water flow. Therefore, we need to regularly clean the laser. When cleaning, it is necessary to use professional cleaning equipment and cleaning agents to ensure that the inside of the laser is clean.

5、 Maintenance
Regular maintenance of the laser can effectively prevent abnormal water flow in the laser. During maintenance, attention should be paid to replacing vulnerable parts such as O-rings, seals, etc., and checking whether the water connections are secure to ensure that the laser is working properly.

In short, abnormal water flow in lasers is a very common issue in laser maintenance. By using the above methods, the problem of abnormal water flow in the laser can be effectively solved, keeping your laser in good working condition. If the above methods cannot solve the problem, it is necessary to promptly contact maintenance personnel for repair.