At present, laser cutting has replaced a large number of traditional cutting methods in the field of industrial processing and become an important force in the transformation and upgrading of manufacturing industrialization.
Steel, copper, stainless steel, aluminum alloy and other metal and non-metallic materials are widely used in laser cutting. For materials with different thicknesses, laser cutting also has corresponding processing mechanisms and solutions. From small workshops to large workshops, from 3C, from electronics to aerospace, laser processing has gone deep into every link of industrial production today, and has had a significant impact on the overall development of industry.
The laser cutting control system has the following advantages:
1. Better automatic adaptability
The laser cutting equipment is equipped with a modern intelligent control system. The laser cutting process is controlled by predetermined parameters. Combined with the feeding system of the laser cutting equipment, the dependence on manual operation is greatly reduced and the risk of errors is reduced.
2. Faster response
With the continuous upgrading of intelligent control system of laser cutting, laser cutting can easily complete complicated geometric structure cutting, ultra wide cutting area panoramic visual cutting and other process problems. The response speed is faster and the cutting efficiency is higher.
3. More functions
The intelligent cutting system can develop more cutting functions and continuously meet the cutting requirements. It can also develop more functions to meet cutting requirements through upgrading and updating, such as lightning piercing, flying cutting, intelligent obstacle avoidance, etc.
4. More cost saving
The intelligent cutting system is capable of one click intelligent typesetting to optimize and improve the utilization of materials. Common edge cutting and disc searching can make greater use of materials, reduce unnecessary material waste, save manual typesetting time, and improve cutting efficiency.
5. More reliable and secure
Laser cutting is a non-contact processing. The machine tool does not need physical contact equipment, and the cutting process does not need any operator's intervention. After setting the parameters of the control system, the laser equipment no longer needs manual control to avoid safety incidents to the maximum extent.
Source: high-energy laser
