Why can't the temperature of water-cooled chiller drop? What are the reasons?

1. If this problem occurs during the initial use, it may be the wrong type of water chiller.
2. Another reason why the temperature of the water chiller does not drop in initial use is that there are some problems in the installation between the water chiller and the cooling tower, circulating pump and piping, which need to be carefully checked according to the installation diagram;

• John Trant

  : 3. If this happens to industrial water chillers that have been used for more than half a year or one year, it may be caused by the following problems: a. The heat exchanger of the refrigerator is too dirty. It is recommended to clean the heat exchanger and clean it regularly in subsequent use; b. The refrigeration system of the chiller leaks freon. It is recommended to find out the leakage point, repair welding and add refrigerant;

• John Trant

  Reply

  @John Trant

  : c. It may be that the working temperature of the industrial water chiller is extreme, too high or too low, resulting in the industrial water chiller can not meet the requirements. In this case, only select a larger industrial water chiller to meet the working requirements.

• John Trant

  Reply

  @John Trant

  : 4. It may be that the water source used has impurities and is attached to the pipes between various equipment through long-term accumulation, resulting in low water flow. Therefore, the pipes between the equipment should be cleaned.