I am new at laser engraving and I’ve been doing some test engraving with text. No matter what size I make the text, the line thickness is the same. Is there a way to adjust this in Lightburn?

Cyril

2023-03-29

192

1

0

Is there any way that we can specify that one of the layers (in my case it is the Red 02 - Boundary Cut layer) always be last in the cut order, regardless of how the ordering is set on import, last used settings etc?I’ve been bitten a few times where I hadn’t noticed another layer is below this, and ended up with inner cuts or engraves...

Gilbert

2023-03-29

322

1

0

Hi there,I am using sculpfun s30 pro 20w diode laser. I use it around %80-90 power. However when i am cutting 8mm or 10mm plywood, it starts to burn small shapes such as 10x small circle has diameter around 10mm. It needs to do around 20-30 pass for a cut that thick poplar or birch plywood. However to be able to cut it without burning the wood, i a...

Clarence

2023-03-29

362

1

0

Help the only way i can get my text the correct way up is to mirror image it on the text screen what am i doing wrong complete Newbie sorry i have an Atomstack A50 pro have i set my Axis wrong ? also what version of Lighburn licence would i need to purchase for my Atomstack i basically just do House Name Signs thanks

Terrelle

2023-03-29

241

1

0

I’ve successfully installed my corfiles. But when I do, it makes my work space .394x.394in with 2 different lens. & I can not change it manually.

Payson

2023-03-29

346

1

0

Inspired by the bionic properties of butterfly wings, scientists have recreated a complex structure previously found only in nature, which promises to open up new ways of manipulating and controlling light to create a new generation of photonic crystals.This structure can be found in the wing scales of certain butterflies, and it can functi...

Nugent

2023-03-29

188

0

0

Recently, a team from DELFT University of Technology (DELFT) in the Netherlands has developed an on-chip technology to measure distances in materials, such as underwater or medical imaging, with high precision. The technology, which relies on sound vibrations and is suitable for high-precision position measurements of opaque materials, could lead t...

Vasili

2023-03-29

237

0

0

Another camera problem. I have two K40s and one laptop with Lightburn, One K40 has the C3d board, the other has an OMTECH controller upgrade board, Both have a camera, one is a 160 degree fisheye, the other is a 170 degree fisheye. The device setup was completed for the omtech version with home and origin at upper left, camera location and calibrat...

Liam

2023-03-28

385

1

1

I replaced my computer today, windows 10 to windows 11, I installed the newest Lightburn software. connected to my controller no problems.time to calibrate the camera.When I click on lens calibration wizard, the camera view is blank.I have 2 cameras it happens with both cameras.I have tried a ton of things.1. reboot camera/ reinstall windows dri...

Jen

2023-03-28

229

1

0

I found that some objects are not closed. Even in a preview, I see it. When I draw basic objects like Rectangle, circle I see some part of the object is missed. What could be wrong?

John Trant

2023-03-28

193

1

0

ALARM:2G-code motion target exceeds machine travel. Machine position safely retained. Alarm may be unlocked. (Right-click the ‘Devices’ button to reset the connection)On or near line 2:Stream completed in 0:00I cant figure it out latest version of lightburn avd sculpfun pro30 10

Robert Evans

2023-03-28

229

1

0

New User, keep getting “waiting for connection or port is busy” error. I am connected with USB. Ran through all the trouble shooting sent to me from ComGrow with no success. I think I need step by step live instruction? Screenshots in comments.

Henry

2023-03-28

397

1

0

Hello,I try to turn on Bi-Directional in the Fill settings but the button is missing. Can someone please help me.

Jamie

2023-03-28

349

1

0

HiI am trying to understand the cutting speeds and Laser diode power.I have a Sculpfun 9 and have cut many pieces of 3mm MDF at a speed of 300 mm/m at an intensity of 80%.I then tried to make a jigsaw puzzle. I stuck the picture onto the mdf using a spray adhesive. I used exactly the same settings and it did not cut through.the only addition is a p...

David

2023-03-28

359

1

0

Hi, I have a little problem.I have a Falcon 10W, these are my first steps with the machineWhen I make a perfect circle and send it to cut, the result is deformed, elongated on the Y axis.How can I solve that?

Tory

2023-03-28

237

2

0