In the past, in order to analyze the types of bacteria in liquid samples, researchers had to cultivate bacteria for several hours or even days in the laboratory. However, a new laser technology can achieve this goal in a few minutes.It is well known that when bacteria are exposed to lasers, they will reflect light back in a spectral mode un...
2023-03-1435600Mitsubishi JE servo pulse control. The program logic has been verified to be correct. Now the position of the equipment is not allowed to exceed the range after about ten minutes of operation. The monitoring Mitsubishi motor command pulse accumulation has drifted up. Later, the filter has been added to improve it. After grounding 0V, the single ser...
2023-03-1323310How to control the stepper motor to realize intermittent feed motion by xinjie plc.
2023-03-1333010I’m making a small drawstring bag.I created a rectangle 100mm x 140mm. I then put a radius of 50mm on the bottom 2 corners making a cup or shield sort of shape (rounded bottom of the bag). Then I created a tool layer (T2) by using the Offset Shapes tool and shrinking by 4 to create my stitch line. Using the Edit Nodes tool, I deleted the top...
2023-03-1317710I was burning a leather key chain 1.25 high 2.5 width. I am burning in inches. the only thing I did was size a circle in mm to add in the key chain. It went from 6 minutes to 2hrs 46 minutes. All of my settings are1 pass except the cut.
2023-03-1327910Lightburn up to date 1.3.01 and now the laser when framing is going ballistic grinding and not framing right. I have projects to do on a time line and if Lightburn will not run when I need it maybe I need to find another software.
2023-03-1340610My laser burns some extra lines in text. Using Genmitsu 3018 router with laser attachment.
2023-03-1336410Is there anyway to have the trace tool not produce double lines when tracing a piece of art? Is there a way to have it just produce a single line other than having to go in and delete every single line that is adjacent to a double line. What I’m asking is can the trace tool be set up to trace down the center of what would be a trace line inst...
2023-03-1324110One equipment on the production line and one servo are transplanted to the normal position. It has been determined that there is no problem with the mechanism. It should be an interference problem. The servo is Panasonic servo motor. I don't know how to eliminate this problem?
2023-03-1329310On March 9, Changguang Huaxin accepted the survey of 9 institutional units, including QFII, others and fund companies. In this survey, Changguang Huaxin disclosed its plans in terms of products and applications.It is expected that 40W chips will be the mainstream in the next two yearsChangguang Huaxin's main business is the research...
2023-03-1327600What have you done so far to accommodate the change in size?There are likely 2 things that need to be changed:1. Workspace size in LightBurn Edit->Device Settings. Note that you’ll want to express this in terms of width x height so 400x850 mm.2. Change of $131 value to $131=850 in Edit->Machine Settings.
2023-03-1332600is there a simple setting for when you rotate text 90 degrees? can i switch the scan direction to move y axis first then the x? when i rotate the text, and there is space between lines, the laser has to travel across those blank spaces just to make one small tick, then move on. seems would be faster to scan across the line of text rather than up/do...
2023-03-1037210Hi guys,I’ve been using Lightburn for some time now with my 50w JPT Fiber laser.I’ve just recently installed and setup my rotary, my problem is once I have successfully setup the rotary for the current project and run project, then saved it for multiple runs. I then create a new project which requires a different rotary config, set tha...
2023-03-1032710I have a project where I have to burn off black paint from a plexiglass. (a transparent scale for a tank with liquid) I got a sheet of transparent, fully clear, not matte, plexiglass (acrylic glass) I spray painted it with black paint (have two choices, from a spray can, of can use an airbrush and paint it with water based acrylic paint, same resul...
2023-03-1022610Hello, i am making an offset on a fairly large circle and the offset isnt round (even after selecting the round option) is there a setting i have wrong?also, how can i make my nodes so that i can round them out?
2023-03-1026310
- Nessun Dato
Italiano
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski