The automation and digital control of metal laser cutting machines are mainly achieved through the following key steps and technologies:1、 AutomationAutomatic loading and unloading system:The automated loading and unloading system can automatically feed the raw materials to be cut into the laser cutting machine and automatically take out the fini...
2024-07-2420710Handheld laser welding machine, as an emerging welding tool, works by converting electrical energy into laser and melting the welding wire and base material through high temperature to achieve welding. The following are common problems and their solutions for this device:1. Excessive wear of the protective lens of the welding gun head: The protec...
2024-07-2420600Rotor and controller mismatch: The rotor and controller of a brushless motor need to be matched to ensure normal operation. If not matched, it may cause overload and short circuit, thereby burning out the motor.Overload: If the brushless motor suddenly encounters excessive load during operation, it will also burn out. This may be due to changes i...
2024-07-23220101. Unstable laser outputUnstable laser output is one of the common faults in fiber lasers, which may lead to unstable processing quality or even processing failure.Possible reasons:(1) Laser lens contamination(2) Poor heat dissipation of laser(3) The laser power supply is unstableresolvent:(1) Timely clean the lenses inside the laser(2) Check if th...
2024-07-2322710This error happens everytime I power on the laser, I have confirmed by opening the laser that the laser autofocus is working, doing a manual A axis reset works perfectly but as soon as I enable Focus Ctrl in A axis vendor setting I get "A axis reset fail" each time the laser powers on. Can anyone help?Controller : Ruida RDC6563FG-LiteLaser Head : R...
2024-07-2124420With the widespread application of laser marking machines, their maintenance methods have also received widespread attention. In summer, not only is the temperature high, but the daytime is also relatively long, which means that every summer is the high-intensity working period of laser marking machines. Below are the maintenance methods for summer...
2024-07-2222720With the development of technology, industrial chillers are increasingly being applied in various fields of industry, making their due contributions to industrial production and improving product qualityAnd industrial chillers are also mechanical equipment, and after running for a long time, some problems may occur, among which corrosion is one of ...
2024-06-1419041Hi, I'm using the Ruida RDC6563 controller for a fiber laser cnc machine with the specifications of a BM110 laser head with auto focus servo. everything is running normally and have done a metal plate cutting test. but there is one issue, the autofocus function on the parameter layer does not work. but servo A axis runs normally on manual jo...
2023-02-1841871The maintenance of helical gear reducers is an important measure to ensure their long-term stable operation and extend their service life. The following are some basic points for maintenance and upkeep of helical gear reducers:Regular inspection: Regularly inspect the gearbox, including checking for any abnormal wear, cracks, or leaks on the appe...
2024-07-2219000Error 1: When carving fabric, the laser will burn through the materialThe first step in avoiding burning through fabrics when using laser engraving/cutting machines is to understand which fabrics can withstand this process and the temperature they can withstand. Durable fabrics such as denim, canvas, and leather can withstand higher temperatures du...
2024-07-2019110This type of malfunction is mainly caused by the failure of the main circuit control equipment (frequency converter, contactor, soft starter, etc.) to operate. It can be checked whether the main circuit control equipment has received control commands in a timely manner, such as whether the main contactor is engaged, whether the frequency converter ...
2024-07-20189001. Speed controlVariable frequency motors can achieve speed control of the motor by changing the power frequency, meeting different speed and load requirements in the production process. This speed regulation method can accurately control the motor speed, improve production efficiency and quality.2. Energy conservation and consumption reductionVa...
2024-07-19178101. Regularly clean the equipmentDuring the use of the equipment, dust and debris will accumulate, which will affect the output power and work efficiency of the laser, and also accelerate the wear and tear of the equipment. Therefore, it is essential to regularly clean the equipment. When cleaning, be careful not to use cleaning agents with chemical...
2024-07-1926300Emergency response methods after power outage1. Immediately stop the water-cooled refrigeration unit: After a power outage, the operation of the water-cooled refrigeration unit should be stopped immediately to avoid greater damage caused by the equipment automatically starting in a dead state or due to power restoration.2. Equipment inspection: Af...
2024-07-18225101. Gear overloadGear overload is a common fault of transmission gears, usually caused by unreasonable mechanical structure design of the transmission device, harsh operating environment, and excessive workload. Gear overload can cause gear cracks, gear tooth surface damage, bearing overload and other faults, which can seriously affect production ef...
2024-07-1822000
- データがありません
日本語
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski