Hi all…I found objects that I like but it’s very intensive for laser.Does LightBurn have option to simplify objects? Check image so you can see what I mean.

John Trant

2023-10-24

152

1

0

So, as I progress down the road to the completion of the Russ Sadler upgrade, I’ve bumped into a few challenges* along the way. When I installed the adjustable head bracket (from Cloudray) I had to move it about 8mm forward so that it wouldn’t slam into the homing sensor (which was on the left side of the X gantry). I have moved that se...

Jen

2023-10-24

163

1

0

On my Atezr L2 with movable Z axis I am trying to make the laser head drop down .5mm per pass, is this the correct setting? or should I go to .75 or even a full mm?Here is how I have it set now:

Liam

2023-10-24

137

1

0

Is it possible with Lightburn to move the laser to last position with a command and not the mouse curser?

jessie

2023-10-23

139

1

0

So I want the yellow to fill, but the red lettering to just be line a with no fill. How is this achievable if it even is?

Patrick

2023-10-23

120

1

0

Industrial chillers are a type of refrigeration equipment that compresses refrigerant to reduce the temperature of water and provide the necessary cooling water for industrial production. After a period of use, industrial chillers may have air in their refrigeration system due to corrosion of internal components, decomposition of lubricating oil an...

Terrelle

2023-10-20

134

1

0

Recently, Bystronic of Switzerland released its financial report for the third quarter of 2023. The financial report shows that in the first three quarters of this fiscal year, due to the liquidation of backlog orders, Swiss Super 100's sales increased by 2.1% at a fixed exchange rate. However, due to the strong performance of the Swiss franc, espe...

Clarence

2023-10-20

117

1

0

I just received a new Atomstack A 40 Pro. I have contacted Atomstack with this problem but I get no response. Maybe someone on here can help. It is supposed to achieve 30,000 mm/min but I can only get it to move at about 6000 mm/min. the baud rate is set at 115,200. Should it be set at a different rate? If baud rate is not the problem, what do I do...

Gilbert

2023-10-20

139

1

0

When going to help to search for info and I click a returned result, the menus at the stop responding. You can click through all menus and they highlight but they no longer respond by opening the menu items that are normally displayed. Clicking application name, Lightburn, at the top of the screen also doesn’t respond. If I go back to search ...

Cyril

2023-10-20

126

1

0

Hi everyone!Please help with RDC6563FG controllerHeught senson has no effect in HMI panel, if i chorted nozzle to earth, i dont see the alarm in controllerI bought a new one aplifier, and this sensor dont worked tooAnd axis Z has not moving any way, i checked up to PIN8(DA) in Z axis motor interface, and i have only 0v in this pin. Any ideas how a ...

hqEbIakv

2023-10-19

237

1

0

CinIonic is a global leader in Barco's company and laser cinema technology. Today, at the SMPTE 2023 Media Technology Summit held in Hollywood, a new Barco laser projector specifically designed for post production was unveiled. As part of the company's award-winning Barco Series 4 laser series, the Barco Series 4 SP4K-P is the first laser projector...

Smith

2023-10-19

132

1

0

1. Evaporation pressure and temperatureIn the operation of a chiller, the evaporation temperature, pressure, and heat brought into the evaporator by cold water are closely related. When the cooling load is high, the return water temperature of the evaporator's cold water increases, causing an increase in the evaporator temperature and corresponding...

Williams

2023-10-19

133

1

0

Buongiorno, dopo l’aggiornamento di lightburn alla versione 1.4.03 è sparita la funzione “constant power mode” dall’impostazione dei livelli.Qualcuno sa dirmi come riattivarlo o se è un bug da segnalare?Leggendo altre discussioni mi pare di capire che è una funzione presente in tutte le versioni

Abel

2023-10-19

164

1

0

Hello you all, how are you?Pretty new to laser cutting but familiar with waterjet-cutting and gcode.Cutting speeds are a hot topic resulting in many question especially from newby’s.Here is what I was thinking;Does Lightburn know what the actual cutting speeds are or where by reading the gcode?The gcode should contain the actual speeds for a...

Aaron

2023-10-19

158

1

0

Hello!I have issue with my A40630. Trying to cut 4mm Plywood, but it takes 20 passes at full power. Also I am using air assist.Tried focusing. Can anyone help me out?

Keegan

2023-10-18

141

1

0