English

From Fiction to Reality: Laser Cutting Technology Has Entered the Shipbuilding Industry

134
2023-12-28 14:12:37
See translation

Laser cutting is a type of metal processing. In industry, there are three main cutting methods: mechanical cutting, thermal cutting, and a set of high-precision cutting methods. Laser technology belongs to the third category. The cutting in this method occurs due to the influence of the laser beam on the product. In fact, it is the molten metal produced by rapid pulse point melting and then blowing. Due to the instantaneous generation of these pulses, the output is continuous and uniform cutting.

In the novel "Engineer Galin's Bisurface", there is a scene where the protagonist uses a laser to cut a huge tank. In the book, this is fictional. Now, this fantasy has become a reality: lasers can cut very thick metals.

There is a viewpoint that laser cutting is only faster and more economical for thin metals. For larger thicknesses, it is best to still use plasma. This is an outdated bias. Modern lasers can cut steel from 25 millimeters, thanks to equipment manufacturers significantly increasing the power of machine tools in recent years. If the earlier standard value was considered 3-6 kW, then 50 kW is now a fairly average power. In Russia, approximately 20 kW is still considered standard, but this is quite significant. And this leap occurred within just 3-4 years.

Laser can cut any alloy of metal and work at a relatively high speed. When using plasma or gas plasma cutting, a large amount of electricity is consumed, more different consumables are required, the edges are often uneven, and the process itself requires many times more time. Laser technology has higher efficiency. They accelerated this process and reduced the cutting cost of one meter by 10-20 times.

The second area of using laser technology is product production. For example, to assemble a ship, complex contours must be handled. Plasma cutting or drilling machines can also be used for drilling, milling, and further processing.

To speed up and improve such processes, you can use a laser pipe cutting machine. The raw material is handed over to the machine, and the output is finished parts. In addition, a workpiece can manufacture 10 different parts simultaneously. This is a fully automated process.

Source: Laser Net


Related Recommendations
  • Lithuanian and Japanese researchers develop silver nanolaser

    Recently, researchers from Kaunas University of Technology (KTU) in Lithuania and the Tsukuba National Institute of Materials Science in Ibaraki, Japan, have collaborated to successfully develop a new type of nanolaser based on silver nanocubes.Although its structure is small and can only be observed through high-power microscopes, its potential application prospects are broad, and the research te...

    2024-12-24
    See translation
  • TRUMPF helps upgrade the automation of 3D laser processing for automotive thermoforming

    (Dechengen, Germany, March 24, 2025) - TRUMPF Group in Germany has now provided end customers with a fully automated one-stop solution for laser processing systems. With this solution, customers can not only shorten the production cycle, but also effectively reduce the cost of 3D laser material processing. Our laser equipment has excellent production efficiency. Now, through the automation upgrade...

    2 hours ago
    See translation
  • Entangled photon pairs generated by quantum light sources can be used for quantum computing and cryptography

    A new device composed of semiconductor rings generates pairs of entangled photons, which can be used in photon quantum processors.Quantum light sources generate entangled photon pairs, which can be used in quantum computing and cryptography. A new experiment has demonstrated a quantum light source made from semiconductor gallium nitride. This material provides a multifunctional platform for devic...

    2024-03-30
    See translation
  • New type of metasurface with adjustable beam frequency and direction

    Recently, according to the journal Nature Nanotechnology, a team from the California Institute of Technology reported that they have constructed a metasurface covered with micro adjustable antennas that can reflect incident light beams: one beam of light enters and multiple beams of light exit, each with a different frequency and propagating in a different direction. This is a new method for proce...

    2024-07-30
    See translation
  • QBeam launches innovative window ablation laser system to achieve free space optical communication

    QBeam is a leader in developing breakthrough optical products and announced today that its handheld laser ablation equipment is fully launched for free space optical communication in indoor office locations. The qBeam window ablation laser allows for the installation of optical communication terminals indoors by treating windows that otherwise block the infrared beams of the terminals.Commercial b...

    2024-02-15
    See translation