chanelink logo
CHANELINK
Polski

The tesat optical terminal selected by Lockheed Martin satellite has passed ground testing

110
2023-10-27 16:52:28
Zobacz tłumaczenie

Tesat Spacecom's laser communication terminal announced on October 26th that the company has passed critical ground testing deployed on NASA satellites.

Tesat's SCOTT80 optical terminal was selected by Lockheed Martin, one of several manufacturers producing satellites for the Space Development Agency.

SDA is an agency under the United States Space Force that plans to deploy a network of interconnected satellites. It includes a transmission layer that will transmit data collected by the missile detection sensor satellite tracking layer. Each spacecraft is equipped with multiple laser communication terminals.

Optical terminals use lasers to connect satellites in orbit so that they can transmit data in space.
Tesat's terminals will be integrated with Lockheed Martin's satellites, which will become part of SDA's planned transmission layer Tranche 1 satellite to be launched by the end of 2024. Lockheed Martin also uses CACI's optical terminals for the Tranche 1 satellite.
All optical terminals installed on SDA satellites must comply with the technical specifications and standards issued by the organization. They must also be able to interoperate with terminals manufactured by other suppliers.

Interoperability with other manufacturers
As part of ground testing, Tesat's terminals must establish data communication links with reference modems, as well as Mynaric and CACI terminals. The terminal of Mynaric will be located on the Tranche 1 satellite of SDA manufactured by Northrop Grumman.
This achievement indicates that Tesat terminals comply with the technical specifications and standards released by SDA and can interoperate with third-party products, "said Thomas Reinartz, the company's CEO, in a statement.

The company pointed out that Kepler Communications has also selected the SCOTT80 optical terminal for its low Earth orbit commercial constellation.

Tesat Spacecom, headquartered in Germany, is establishing a US subsidiary to support military and commercial plans. The company is an independent subsidiary of Airbus Defense and Aerospace.

Tesat plans to start producing optical terminals on Merit Island, Florida. The company stated that to date, 46 Tesat terminals are on track and 180 are in production.

Source: Laser Network


Powiązane rekomendacje

  • Researchers use laser doping to enhance the oxidation of IBC solar cells

    Researchers from the International Solar Research Center at Konstanz and Delft University of Technology have discovered a method to pattern the back end of a cross finger rear contact battery, improving its efficiency by making certain parts of the solar cell thicker.Researchers have developed a new technology that enhances oxidation in selected areas by patterning the back or back of IBC solar ce...

    2024-02-20
    Zobacz tłumaczenie

  • Significant progress made in 808nm high-power semiconductor laser chips

    The R&D team of Xi'an Lixin Optoelectronics Technology Co., Ltd. (hereinafter referred to as "Lixin Optoelectronics") has made significant progress in 808nm high-power semiconductor laser chips through continuous technological breakthroughs.808nm semiconductor laser, as an ideal and efficient solid-state laser pump source, plays an important role in advanced manufacturing, mechanical processin...

    2024-06-14
    Zobacz tłumaczenie

  • Lawrence Livermore National Laboratory develops PW grade thulium laser in the United States

    Recently, according to Tom's Hardware, Lawrence Livermore National Laboratory (LLNL) in the United States is developing a PW (1015 W) level large aperture thulium (BAT) laser. It is reported that this laser has the ability to increase the efficiency of extreme ultraviolet lithography (EUV) light sources by about 10 times, and may potentially replace the carbon dioxide laser used in current EUV too...

    02-13
    Zobacz tłumaczenie

  • Panacol showcases a new optical grade adhesive on Photonics West

    Panacol will showcase new optical grade resins and adhesives for embossing and optical bonding applications at the SPIE Photonics West exhibition held in San Francisco, California, USA from January 30 to February 1, 2024.These new adhesives can be used for sensors in lightweight carpets, smart devices, and wearable devices in the automotive industry, or for generating structured light in projector...

    2023-12-12
    Zobacz tłumaczenie

  • Shanghai Institute of Optics and Fine Mechanics has achieved beam splitting vortex control and interference detection for the first time in the 46.9nm wavelength band

    Recently, Associate Researcher Zhang Junyong from the High Power Laser Physics Joint Laboratory of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, together with Professor Zhao Yongpeng's research group from Harbin Institute of Technology and Professor Zhan Qiwen's research group from Shanghai University of Technology, completed the experimental verification of 46....

    2024-10-17
    Zobacz tłumaczenie