I’m trying to create a grid of short lines using perforation mode. I’ve staggered the lines since I don’t want them to touch. The vertical lines look on but the horizontal lines, which are parallel, are offset in the preview. I have no idea why. My alternative method will be to make a whole lot of short lines using the array tool....
2023-11-3014700Recently purchased an atomstack A10 to learn and play around with a Laser machine and I like the Lightburn software as well.I just want to ask about the license, it says it can be used on three machines. I only want to use two machines but I’m worried my setup may cause an issue with the licensesingI am in the UK and my ISP is plusnet and I...
2023-11-2918610Okay, I’d like to resize these texts into same width or height. I tried to use the encircled tools. It does the job but does not apply the lock aspect ratio which makes most of the text condensed or wide. Anyone please help me.
2023-11-2914510Perovskite solar cells are solar cells that use perovskite type organic metal halide semiconductors as absorbing materials. They belong to the third generation of solar cells and are also known as new concept solar cells.operational principlePerovskite solar cells are solar cells that use perovskite type organic metal halide semiconductors as abs...
2023-11-2812410Having an issue with slots. On a drawing with several slots, all 3mm, only a few actually appear to be editable.I’ve checked there are no extra nodes or rounded corners in the drawing. The drawing seems to be closed as I only see one green node. No errors are present in the dialog box.
2023-11-2814610I was using the same speed and the same power, but then it slows down a lot, but i dont know the reason, what reason can it be?I was using my laser cut machine to cut the polywood in 3mm and with the suggested speed power and pass, but then the machine just no more able to cut it through as from the beginningfor my laser the suggested speed is 350,...
2023-11-2812910I intend to cut two lines to transform the two areas into one. When I do “trim line” the line n stays in one. Then it creates open part problems. Does anyone know a way to not have to see each zone to manually join these points that don’t stay together?
2023-11-2811910Although it may be used to cut a wide range of materials with accuracy and versatility, laser cutting has several risks that should be considered before using it regularly. Certain steps need to be taken to guarantee both safety and the best possible outcomes. General safety measures for maintaining laser cuttings include the following:1. Put on ...
2023-11-2711810Buen día, ¿alguien podría ayudarme para corregir o saber porque pasa esto? Agradezco de antemano su atención
2023-11-2718810I would like to buy a new notebook. What are the minimum system requirements for LightBurn to work properly (storage space, graphics card, etc.).I will also work with CORELDraw Graphics Suite 2023. I think if I stick to these requirements, LightBurn should also work perfectly.
2023-11-2713510Have tried the Lightburn material test with 2 different lasers but operated with the same laptop. When running the test pattern, the line speed will change but the fill speed seems to remain the same. Seeing very little if any change in the fill rates.Tried on a 2 year old Ortur Lm2 10w and a fairly new Xtool d1 pro 20w.1st was set at 20 to 100 % &...
2023-11-2513610I am simply trying to turn my Atezr L2 24w machine on, set it up, and get going! Every time I turn it on, it immediately starts beeping saying a flame detected. I have tried rechecking everything over and over and am at a loss. I can’t get started on anything and very frustrated. The I seem to have everything setup correctly, have looked at h...
2023-11-2515110I had to format by computer , i am now reinstalling all of softwares i need including LBthanks God i made a copy of my previous machine setting file and i dragged and dropped it in to working area and LB seems ok.i imported it twice by mistake and now i have also a undesired copy (3) of my own machine settingPoint is that by default any time i ope...
2023-11-2515310What is the sign for the servo to return to the origin? For example, there is a home button ->press the button ->the servo starts returning to the home point ->touch the home sensor (sensor closed) ->the servo starts decelerating ->the home sensor is disconnected (zero return completed)How to determine the completion of zeroing in t...
2023-11-2416110I remember to use a front and rear limit and a near origin for relative positions.Is it better to use absolute position or relative position for turntable servo? The turntable needs to be stuck once every time it passes through a workstation. What control method can be used to minimize the cumulative error as much as possible! And prevent the servo...
2023-11-2413210
- Không có dữ liệu
Tiếng Việt
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski