Looking for a quicker way to do this, I have tried all the tools (Boolean Assist ) and I don’t get the results I need. I have to duplicate the rectangle because it will not stay whole with these tools. Is there a “one click” tool that will do this?
2023-09-0645510Hello greetings to all, how do I correct “Out of Limit Cut” in LightBurn?
2023-09-0634010I am going to mount the Atomstack to a bench as I will be adding a Yaxis rails, Once I am affixed to the bench I would like the laser to start at the Yaxis 0 on the machineruler and the same with the Xaxis set to the 0.I want to place two register boards one horizontal and one vertical, this makes sure my cut is square with my world.
2023-09-0622410The laser chiller is an important part of the laser, which keeps the temperature of the laser in a suitable range by cooling it to ensure the stability and life of the laser. So, how to connect the interface of the laser chiller?First of all, it is necessary to clarify the working temperature and flow requirements of the laser, ensure that the la...
2023-09-0633810Following its success at ATX East, laser innovator Luxinar will proudly showcase its latest advances in laser technology for cutting, drilling and marking in Booth 1830 during ATX Minneapolis, USA (scheduled for October 10-11).New SR e Series and SR x Series - High quality and high speed processing The SR e 9.3µm series CO 2 laser sou...
2023-09-0638410Recently, nano and microdisk lasers have emerged as potential light sources and probes for different applications in the biomedical and nanophotonics industries. Their ability to obtain lasers with ultra-narrow band accuracy and deterministic wavelengths is important for diverse applications such as on-chip bioimaging, on-chip photon communication,...
2023-09-0624210Hello everyone, I wanted to see if the ruida rd6445g-dfm-rd could be replaced by the ruida rd6445s ??.since the rd6445g had a problem and cannot be used
2023-09-0231590First off, don't leave your machine alone running in an enclosed cabinet for an hour (tried to make a power scale on EPDM rubber).Now, does anyone know where I can find a manufactured Ruida controlled machine that with an 80W diode under $2,000.00?
2023-09-0535740I have a D1 Pro 20w and using LightBurn. When I do my burns the laser moves up and down instead of side to side. Is that how it’s supposed to burn? If not…what’s the deal?!(See how the burn marks are vertical instead of horizontal)
2023-09-0539310Im downloading ai/vector/svg files from adobestock. Saves as ai file, when i try to open in lightburn i get pop up “this file is an embedded postscript file, and is not supported by LightBurn”. Didnt have this problem before so wondering how to fix. Thanks!
2023-09-0520911Kollmorgen’s new AKD2G 24A drive is designed for applications in precision multi-axis servo systems. The new single-cable optimized drive builds upon the strengths of the AKD2G portfolio including upgraded safety features, SD card backup and a graphical display with higher amperage to support more applications with higher power requirements s...
2023-09-0520410In the modern machinery manufacturing industry, precision spur gears are widely used in various high-efficiency transmission systems. As a key mechanical transmission component, it not only has high precision and high reliability, but also can achieve smooth transmission power output. This article will introduce you to the relevant knowledge and ap...
2023-09-0528910In a wide range of mechanical fields, metal gears have always been one of the most common and reliable components in transmission systems. As a key component of efficient transmission, metal gears have won the favor of engineers and manufacturers for their excellent performance and reliability. This paper will introduce the advantages and applicati...
2023-09-0524611im engraving on a large tumbler with a rotary with the comgrow z1 10w diode. the rotary replaces my Y axis on the z1Y axis looks fine, so this new rotary should be fine, right? however, X-axis seems to be skipping? not sure what the term is…im using Offset Fill instead of Fill to save time:this is what it is supposed to look like.any h...
2023-09-0431610I’m hoping to create a raised letting ink stamp.Can someone tell me the best way to create a rectangle around these letters, then tell Lightburn to cut around the letters to until it reaches the rectangle?
2023-09-0424510
- Không có dữ liệu
Tiếng Việt
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski