On May 2 this year, Japan's Hamamatsu Photonics' €205 million strategic acquisition of Danish fiber laser manufacturer NKT Photonics was rejected by the Danish authorities, and the acquisition was derailed.Recently, Hamamatsu Photon in the official issued the latest statement, clearly stated that it will restart the acquisition of NKT ...
2023-07-2836910Since the concept of laser frequency combs was born in the late 1990s, it has revolutionized the accurate measurement of frequency and time. In addition to its initial applications in optical clocks and precision spectroscopy, optical frequency combs (OFCs) have shown great potential in a variety of applications, including ultraviolet and infrared ...
2023-07-2840510Hi, I have just started to use Lightburn software for my xtool 10W D1 Pro. I need to give primitive shapes control points. I followed the instructions in a closed post. I didn’t find the “edit/add control points option” but I could change the primitive object into a path with the right click option, this greyed the option out, but...
2023-07-2834110I was excited to see the Cubiio2 show up when I upgraded today in the laser list, and was able to connect to it by creating it manually, selecting cubiio, then exporting the file, adding in the ip to the ‘info’ portion, and reimporting. Now I can control the move portion of my cubbio2 over wifi which is super cool.When I hit ‘hom...
2023-07-2822910Lightburn MKS DLC32 error:20I am using an MKS DLC32 and am getting the error code error:20With gbrl everything works fine, but with Lightburn it doesn’t go well.The machine is steering with the controls. The fire is also on. But when I start it, the machine draws 1 line and the laser does not turn on.Is there a solutionJan Postema
2023-07-2834310The water pump is a very important part of the laser chiller system, which is responsible for transporting low temperature cooling water to the system and providing a cold source for the equipment. Therefore, if the water pump of the laser chiller fails, it will have serious consequences for the entire system. So, how to correctly maintain and main...
2023-07-2822510The motion control system is equivalent to the brain of the laser equipment, which coordinates the various components of the equipment to work together and directs the laser to accurately focus and move quickly, which is the key to the effective completion of the task of the entire laser processing. Motion control system in different industries, di...
2023-07-2832610Hi,Been using my Atomshack a5 m50 pro on my MacBook Pro for a couple of weeks now everything going smooth but tonight when I hit the frame button before I start it takes me to the home corner and makes a horrible grinding noise, which I stop before it does it now. But why is it doing this does anyone have any idea? I wasn’t messing with the ...
2023-07-2735110I am using Piburn grip (set to 12,800 steps), an Omtech AF2028-80, and Lightburn 1.4.00.When I manually move the laser using arrow to verify circumference it works perfect. For example, I set circumference of the tumbler I’m working on to 236mm. I draw a mark on the tumbler and set laser pointer to that mark. I click the up arrow in lightbur...
2023-07-2720210I had this option on the very limited software that came with the device, but cant find it here
2023-07-2632410In he design process, when we have created a circle as a part of the design, how do we erase a portion of that circle ?
2023-07-2625510An air-cooled chiller is a cooling device that uses a fan and a radiator to achieve cooling. Compared with the water-cooled chiller, the main difference is that the heat dissipation of the condenser is different. Many of the common small industrial chiller on the market are air-cooled chiller. Today I will tell you about the causes of fan failure i...
2023-07-2619410Gear drive is widely used in mechanical equipment. The transmission of motion and power by gears is accomplished by the meshing of gear tooth surfaces. Gear transmission will produce friction and wear, need to add lubricating oil lubrication on the tooth surface, the lubricant will form adsorption film and reaction film on the tooth surface, not on...
2023-07-2636610Hi Community, a question for all;Say I have a photo of a cat head and I wanted to trace the outer feature lines of the cat’s head only, does any one know of a way to do thisin the auto trace without having to manually trace it out with a calm hand. I guess the question is, anyone know of a way in Lightburnto create an outer line silhouette w...
2023-07-2529510How can I seperate the drawings so that I can arrange them to maximize my table?
2023-07-2529410
- Không có dữ liệu
Tiếng Việt
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski